Operation Manual

See illustrations
Sensor
rubber pad
1. Temporarily attach the sensor to the left chain stay.
(1) Loosen the sensor screw using a Phillips screwdriver and check that the sensor arm
moves.
Nylon tie
left chain stay
Do not fully tighten the nylon ties. Once the nylon ties are fully tightened they cannot be
removed.
Caution
(2) Attach the sensor rubber pad to the sensor.
(3) Refer to the illustration and temporarily attach the sensor to the left chain stay with
nylon ties.
2. Temporarily attach the magnet.
Sensor screw
Sensor arm