Operation Manual

Sensor
rubber pad
(1) Loosen the sensor screw using a Phillips screwdriver and check that the sensor arm
moves.
Nylon tie
left chain stay
Cadence
magnet
Inside of the crank
Spoke
Nylon tie
Sensor
zone
Wheel
magnet
Do not fully tighten the nylon ties. Once the nylon ties are fully tightened they cannot be
removed.
Caution
(2) Attach the sensor rubber pad to the sensor.
(3) Refer to the illustration and temporarily attach the
sensor to the left chain stay with nylon ties.
2. Temporarily attach the magnet.
Sensor screw
Sensor arm