Operation Manual

Usage Instructions

General

Device

Smartphone

1. Tap (MENU) and then [Device].

Changing smart computer settings

• Nickname

Changes the name of the smart computer.

* Paired sensors are displayed with "A" or "C" after the sensor name.

• Device settings are shared when smart computer is connected to your smartphone.

• When using an iPhone, you cannot sync settings of commercial sensors.

When measuring in Sensor Direct Mode, it is necessary to conﬁgure sensor settings

separately via smart computer.

1. Switching to Sensor Direct Mode

2. Pairing a smart computer with a sensor

3. Tire circumference setting

Important

The following section explains how to pair a smart computer with a sensor and how to

conﬁgure various settings.