Operation Manual

When a signal is received from a paired power sensor, power data is displayed as a value.
Smart computer
The power, average power, custom average power, maximum power, average lap power in
real time, and power balance can be displayed on a smart computer.
* Separate left and right power sensors are necessary for power balance measurement.
* To display power data on the measurement screen, it is necessary to register functions
(measurement data) by tapping
(MENU) > [Device] > [Smart computer name] >
[Display Customization].
Changing the measurement screen
* Tap
(MENU) > [Device] > [Smart computer name] > [Custom Average Power] to
specify the calculated number of seconds for the custom average power.
Device
* To increase precision, it is recommended to perform calibration before power measurement.
Perform calibration using Cateye Cycling™, making sure to first connect a smartphone.
1. Connecting smart computer and smartphone
2. Power sensor calibration
Power-saving mode
Switching measurement data display
If you have power sensors
Button lock function
Start measurement