To use Padrone Smart+, the “Cateye Cycling™” smartphone application (free of charge) is required. For the latest information on the smartphones that are compatible with Cateye Cycling™ operations, see “Cateye Cycling™ Recommended Devices”. Usage Instructions For troubleshooting related to the smart computers or to Cateye Cycling™, see "Frequently Asked Questions". * For explanatory purposes, in this manual red text/icons on the smart computer screen represent flashing items.
Setup Flowchart The setup procedure is as follows. 1. Checking package contents 2. Install Cateye Cycling™ 3. Pairing with smart computer 4. Pairing with a sensor (If you have sensors) 5. Mounting the bracket 6. Mounting the speed (cadence) sensor (ISC-12) (Optional) 7. Wearing the heart rate sensor (HR-12) (Optional) After setup is complete, please see How to Use.
Setup Flowchart 1. Checking package contents ! Smart computer unit * Check button locations before starting set up. ! Accessories Bracket band Bracket rubber pad Bracket Dial * The Speed + Cadence Kit includes an integrated speed (cadence) sensor (ISC-12) in addition to the items above. * The Triple Wireless Kit includes an integrated speed (cadence) sensor (ISC-12) and a heart rate sensor (HR-12). 2. Install Cateye Cycling™ 3. Pairing with smart computer 4.
6. Mounting the speed (cadence) sensor (ISC-12) (Optional) 7.
Setup Flowchart 1. Checking package contents 2. Install Cateye Cycling™ Install the Cateye Cycling™ smartphone app (free) on the smartphone to be used. Smartphone 1. Install Cateye Cycling™. If using an iPhone If using an Android smartphone * See Cateye Cycling Recommended Devices for the latest information about smartphones recommended for use with Cateye Cycling™. 2. Launch Cateye Cycling™. Follow the on-screen instructions and allow the use of GPS and Bluetooth® devices.
. Mounting the speed (cadence) sensor (ISC-12) (Optional) 7.
Setup Flowchart 1. Checking package contents 2. Install Cateye Cycling™ 3. Pairing with smart computer The following section explains how to format (initialize) the smart computer and then pair with a smartphone. Important • Pairing is necessary to use a smart computer or a sensor. • Do not pair sensors at a race venue or in similar locations where there are a lot of other users. Doing so may cause the smart computer to be paired with another device. Smart computer 1.
3. Verify that [FORMAT] is flashing, and press MODE for 1 second. Caution All data will be deleted and smart computer will be reset to factory default settings. Confirm The display switches to the smartphone search screen. Smartphone 4. From (MENU) at the top left of the screen, turn on [Connect] and tap [Device]. Tap [Pair to Device] to start pairing. When Cateye Cycling™ detects smart computer, a message is displayed on the smartphone. Tap [Pairing] to complete pairing.
Smart computer pairing is now complete. If you have sensors, proceed to "Pairing with a sensor". If you do not have sensors, skip to "Mounting the bracket". 4. Pairing with a sensor (If you have sensors) 5. Mounting the bracket 6. Mounting the speed (cadence) sensor (ISC-12) (Optional) 7.
Setup Flowchart 1. Checking package contents 2. Install Cateye Cycling™ 3. Pairing with smart computer 4. Pairing with a sensor (If you have sensors) Smart computer can be used with sensors compatible with Bluetooth 4.0. Pair it with optional accessories or commercial sensors as required. Important • Pair all sensors that you intend to use. • When using an iPhone, you cannot sync settings of commercial sensors.
3. Set the tire circumference for a sensor capable of speed measurement. Tap [Device], and then tap [Sensor name] > [Tire Circumference] (the length of the outer circumference of the tire). Select the tire circumference according to the tire size written on the side of the tire. Determining tire circumference * Default value: 2096 mm (700x23c) * Requires to set tire circumference for each sensor. * You can also change sensor names and cancel pairing from this screen. Sensor pairing is now complete.
Pairing with a sensor Switching to Sensor Direct Mode Switch from Mirror Mode to Sensor Direct Mode. Smartphone 1. Close Cateye Cycling™ or from (MENU), turn off [Connect]. Smart computer 2. From the smartphone search screen, press MODE for 1 second to switch to Sensor Direct Mode. (1 second) Smartphone search screen Measurement screen * Smart computer will search for a sensor instead of your smartphone. In this mode, the sensor icon flashes to indicate sensor reception status.
Pairing a smart computer with a sensor Tire circumference setting
Pairing with a sensor Switching to Sensor Direct Mode Pairing a smart computer with a sensor Pair a sensor that you want to use with smart computer. Important • Pairing (sensor ID synchronization) must be performed in order to use a sensor. • Do not pair sensors at a race venue or in similar locations where there are a lot of other users. Doing so may cause the smart computer to be paired with another device. • Pair all sensors that you intend to use.
• SP : Speed sensor • ISC : Speed/cadence sensor • CD : Cadence sensor • HR : Heart rate sensor • PW : Power sensor * When pairing a sensor with a smart computer, a "C" is displayed after the sensor name. Important When the smart computer displays [ID FULL] on the screen and returns to the sensor pairing screen, the maximum number of sensors have been paired. Up to 9 separate sensor IDs can be paired with the smart computer.
Pairing with a sensor Switching to Sensor Direct Mode Pairing a smart computer with a sensor Tire circumference setting Set the tire circumference for a sensor capable of speed measurement. Important • Pairing (sensor ID synchronization) must be performed first. Pairing a smart computer with a sensor • Set tire circumference for each sensor. The default value is 2096 mm (700x23c). 1. From the measurement screen, press OPTION for 2 seconds to switch to the sensor pairing screen.
Sensor selection (1 second) Tire circumference value Increase numbers Move to next digit (1 second) * Sensors that can be selected are those that have been paired with Cateye Cycling™ or a smart computer. The letter that appears after the sensor name indicates how the sensor was paired. • A : Sensor paired with Cateye Cycling™ • C : Sensor paired with a smart computer * Error is displayed if values outside the setting range are entered. 3. Press OPTION to confirm settings.
Setup Flowchart 1. Checking package contents 2. Install Cateye Cycling™ 3. Pairing with smart computer 4. Pairing with a sensor (If you have sensors) 5. Mounting the bracket The bracket can be mounted on either the stem or the handlebar. Watch video See illustrations When mounting on the stem When mounting on the handlebar Mounting and removing the smart computer unit ! When mounting on the stem 1. Check bracket orientation and attach it to the bracket band. Bracket band Bracket 2.
Bracket rubber pad 3. Loop the bracket band around the stem and tighten the dial to secure it. Dial Cut Caution • Always tighten the dial by hand. Using a tool or other object to tighten the dial may crush the screw thread. • Trim bracket band carefully so the cut end will not cause injury (see step 3 above). ! When mounting on the handlebar 1. Check bracket orientation and attach it to the bracket band. Bracket Bracket band 2.
Dial Cut Caution • Always tighten the dial by hand. Using a tool or other object to tighten the dial may crush the screw thread. • Trim bracket band carefully so the cut end will not cause injury (see step 3 above). ! Mounting and removing the smart computer unit Mounting Click Removing While holding smart computer Push out Caution To remove smart computer, push out while holding the unit with the other hand to ensure that it does not fall. 6.
Setup Flowchart 1. Checking package contents 2. Install Cateye Cycling™ 3. Pairing with smart computer 4. Pairing with a sensor (If you have sensors) 5. Mounting the bracket 6. Mounting the speed (cadence) sensor (ISC-12) (Optional) The speed (cadence) sensor can be mounted either on the top or bottom of the chain stay. Caution If the speed (cadence) sensor is mounted on the bottom of the chain stay rather than on the top, the adjustment range between the sensor and the magnet will be narrower.
See illustrations 1. Temporarily attach the sensor to the left chain stay. (1) Loosen the sensor screw using a Phillips screwdriver and check that the sensor arm moves. Sensor screw Sensor arm (2) Attach the sensor rubber pad to the sensor. Sensor rubber pad (3) Refer to the illustration and temporarily attach the sensor to the left chain stay with nylon ties. left chain stay Nylon tie Caution Do not fully tighten the nylon ties. Once the nylon ties are fully tightened they cannot be removed. 2.
Inside of the crank Cadence magnet Nylon tie Sensor zone Spoke Wheel magnet (1) Using a nylon tie, temporarily attach the cadence magnet to the inside of the left crank arm so that it faces the cadence sensor zone. (2) Rotate the sensor arm and temporarily attach the wheel magnet to a spoke facing the speed sensor zone.
pedal axle. In this case, remove the adhesive tape from the magnet and do not use the nylon tie. 7.
Setup Flowchart 1. Checking package contents 2. Install Cateye Cycling™ 3. Pairing with smart computer 4. Pairing with a sensor (If you have sensors) 5. Mounting the bracket 6. Mounting the speed (cadence) sensor (ISC-12) (Optional) 7. Wearing the heart rate sensor (HR-12) (Optional) Heart rate measurement is performed by wearing a heart rate sensor around the chest. Before wearing the heart rate sensor Warning Never use this device if you use a pacemaker.
Heart rate sensor HR strap 2. Wear the HR strap by sliding the hook over the other end of the strap. Wind the HR strap around your body and adjust the length to suit your chest (underbust). Overtightening the strap may cause discomfort during measurement. Hook Back side Electrode pads * Wear the heart rate sensor so that TOP faces up. * Ensure that the electrode pads are in close contact with your body. * If you have dry skin or are wearing the sensor over a shirt, measurement errors may result.
Usage Instructions You can use smart computer in mirror mode or sensor direct mode depending on your preferences or the situation. Important Information for iPhone Users Mirror Mode and Sensor Direct Mode functions and display details What is Mirror Mode? About screen displays Smart computer screen Cateye Cycling™ screen Start measurement Viewing activities With Cateye Cycling™, you can check and manage trip and summary data (called "activities").
* Information on commercial sensors paired with the smart computer remains as it is.
Usage Instructions Important Information for iPhone Users Important Currently, some restrictions on functions that can be used with Padrone Smart+ apply to Cateye Cycling™ for iPhone. These functions will become available through updates to the Padrone Smart+ firmware and the Cateye Cycling™ app. It is recommended that users update to the most recent version of Cateye Cycling™ and Padrone Smart+ firmware whenever possible. * Areas relevant to the above are described with the mark.
Usage Instructions Functions and details displayed in Mirror Mode and Sensor Direct Mode The following functions can be used in Mirror Mode and Sensor Direct Mode.
*1 Heart rate, cadence, and power measurements require pairing with each sensor. *2 Requires separate left and right power sensors. *3 Requires a smartphone with a built-in pressure sensor.
Usage Instructions What is Mirror Mode? Mirror Mode refers to syncing smart computer with Cateye's smartphone app, Cateye Cyling™. By using smart computer with Cateye Cycling™, you can connect smart computer and optional/commercial sensors (speed, cadence, heart rate, and power) with your smartphone, and record log information including your smartphone's GPS function while you measure. In this case smart computer becomes a monitor that displays smartphone measurement data in real time.
Usage Instructions What is Mirror Mode? Smart computer screen The screen segments and display functions to be displayed on the measurement screen can be assigned through screen customization. The following explains about customizable display, using the default screen as an example. Measurement screen Simple Navigation display * To customize the screen, tap (MENU) > [Device] > [Smart computer name] > [Display Customization].
Important Only incoming notifications for e-mail addresses registered through [Phone] and [Add Account] will be displayed. When an incoming notification is received, the display will not show the app name or the name of the sender. * Contact name registered with non-alphabet characters will be displayed as “Other”. * The incoming notification icons and count are reset when measurement is paused, reset, or finished.
Displays various measurement data. • Speed/cadence/heart rate flash: If using a CATEYE sensor, the values related to the sensor's battery replacement period start flashing to indicate that it is time to replace the battery. Battery replacement : Optional sensors • Power values flash: When using separate left and right power sensors, power values flash on and off to indicate that only signals from one sensor are being received.
Usage Instructions What is Mirror Mode? Smart computer screen Cateye Cycling™ screen This is the Cateye Cycling™ home screen. From this screen you can start, pause, and finish measurement. * Starting, pausing, and finishing measurement can be done remotely from the smart computer unit. * Measurement data will be displayed as [--] if the sensor signal cannot be received. Menu button Displays the menu. Device connection status icon Displays connection status with other devices.
・ (Cadence sensor) ・ (Power sensor) * A grayed-out icon indicates an unconnected sensor. * Speed (cadence) sensors (ISC) display both and . Quick Set The Quick Set function allows various measurement functions to be turned ON/OFF or a goal to be set in simple navigation quickly. GPS icon Indicates GPS signal reception status. Calibration button Performs power sensor calibration.
Displays the number of temporarily saved trips. Important The maximum number of trips that can be saved temporarily is 30. If this number is exceeded, the icon changes to [Full] and it is not possible to temporarily save any more trips. It is recommended that trip data is saved and uploaded regularly.
Usage Instructions Start measurement Important • Smartphone use When measuring, turn the smartphone display off, and with Cateye Cycling™ running, store the smartphone in a safe place such as a bag or pocket. As measurement start/pause/resume and reset operations (finish trip) can be performed remotely from smart computer, there is no need to take out your smartphone until you want to save or upload trips. * Cateye Cycling™ can measure even when running in the background.
Auto pause function Power-saving mode Button lock function If you have power sensors
Start measurement 1. Connecting smart computer and smartphone Smartphone 1. Launch Cateye Cycling™, and from (MENU) turn on [Connect]. Smart computer 2. On the measurement screen, press MODE for 1 second to display the smartphone search screen and connect with your smartphone. When smart computer connects to a smartphone, it switches to the measurement standby display.
(reset operation) 6.
Start measurement 1. Connecting smart computer and smartphone 2. Performing pre-measurement preparation The following procedure shows how to turn various measurement functions ON/OFF and how to configure goal settings as desired. This section also explains the quick set feature for quickly configuring settings from the Trip screen. Smartphone 1. Tap (MENU) and then [Trip]. 2. Tap [Quick Set] on the upper right of the screen. • Auto lap / Countdown Turn the function ON/OFF as desired.
• Goal Specifies a goal in simple navigation. Simple navigation function 3. Tap (back). The display returns to the Trip screen. 3. Starting measurement 4. Pausing/resuming measurement 5. Finishing measurement (reset operation) 6.
Start measurement 1. Connecting smart computer and smartphone 2. Performing pre-measurement preparation 3. Starting measurement Smart computer When smart computer is on the [READY] (measurement standby) screen, pressing SS/LAP for 1 second starts measurement. (1 second) Measurement standby Measurement starts * If the connection with the smartphone is interrupted during measurement, smart computer switches to the smartphone search screen.
Button lock function If you have power sensors
Start measurement 1. Connecting smart computer and smartphone 2. Performing pre-measurement preparation 3. Starting measurement 4. Pausing/resuming measurement Smart computer Pressing SS/LAP for 1 second displays [PAUSE] and pauses measurement. Pressing SS/LAP again for 1 second resumes measurement. (1 second) During measurement Paused 5. Finishing measurement (reset operation) 6.
Start measurement 1. Connecting smart computer and smartphone 2. Performing pre-measurement preparation 3. Starting measurement 4. Pausing/resuming measurement 5. Finishing measurement (reset operation) Smart computer Pressing MODE for 3 seconds will end measurement and switch to the [READY] display. At this time, the trip data will be temporarily saved to the smartphone, and the measurements on the smart computer will be reset.
Auto lap function Countdown function Auto pause function Power-saving mode Button lock function If you have power sensors
Start measurement 1. Connecting smart computer and smartphone 2. Performing pre-measurement preparation 3. Starting measurement 4. Pausing/resuming measurement 5. Finishing measurement (reset operation) 6. Saving and uploading trips After measurement is complete, the trip can be saved in Cateye Cycling™ and can be uploaded to various service sites. Smartphone 1. On the Trip screen, tap (Flag) to finish measurement. The app switches to the upload screen. 2. Turn on an upload destination.
Activity list * When not performing measurement, it is recommended that you turn off [Connect] from (MENU) to minimize smartphone battery drain.
Start measurement Switching measurement data display Smart computer You can switch the display of data being measured in Cateye Cycling™ by pressing MODE. * The data displayed changes depending on the state of the sensor connection and the screen customization settings. The following gives an example of initial configuration of the measurement screen.
* During initial configuration, screens 3 through 5 are undefined and thus not shown. To add screens or to change screen segments or measurement data, tap (MENU) > [Device] > [Smart computer name] > [Display Customization]. Changing the measurement screen * Heart rate, cadence, and power data will not be displayed unless each sensor is paired.
Start measurement Switching measurement data display Simple navigation function The Simple navigation function displays the direction and straight-line distance from a current location to a goal or a start point. Important • The simple navigation function shows the direction and straight-line distance. It does not provide route (street) guidance. • The simple navigation function cannot be displayed when screen customization is set to display 7 or 8 screen segments.
(1 second) Simple Navigation display (goal) Measurement screen * Performing the same operation will display the simple navigation (goal) again. * To go back to a start point, see "Back to start point". Back to start point Display the direction and straight-line distance to the start point. * Because a trip's start point is set automatically, this function can be used right away. Smart computer 1.
Lap function Auto lap function Countdown function Auto pause function Power-saving mode Button lock function If you have power sensors
Start measurement Switching measurement data display Simple navigation function Lap function Smart computer You can record a lap by pressing SS/LAP on the measurement screen during measurement. When the lap is recorded, the lap information is displayed temporarily before returning to the original measurement screen. The displayed lap information is as follows. * This feature can be used in conjunction with the auto lap function.
*1 The sequential lap number, including auto laps, will be displayed. If the total number of laps exceeds 999, the following laps will not be recorded. *2 Measurement data will be displayed as [--] if the sensor signal cannot be received. *3 Requires a smartphone with a built-in pressure sensor.
Start measurement Switching measurement data display Simple navigation function Lap function Auto lap function Smart computer Laps can be recorded automatically without any button operation according to distances, times, or locations set in advance. When the lap is recorded, the lap information is displayed temporarily before returning to the original measurement screen. The displayed lap information is as follows. * This feature can be used in conjunction with the lap function.
*1 A number that includes both the lap number and the auto lap number will be displayed. If the total number of laps exceeds 999, the following laps will not be recorded. *2 The display shows the measurement status of the auto lap being measured and the lap count. *3 Measurement data will be displayed as [--] if the sensor signal cannot be received. *4 Requires a smartphone with a built-in pressure sensor. * The Auto lap function settings can be accessed by tapping [Auto Lap].
Power-saving mode Button lock function If you have power sensors
Start measurement Switching measurement data display Simple navigation function Lap function Auto lap function Countdown function Smart computer This function delivers a notification when a distance or time set as a goal is reached. When the goal is reached, [FINISH] flashes on the screen and an alarm sounds. • Distance: The specified distance is set as the goal. • Time: The specified time is set as the goal.
Start measurement Switching measurement data display Simple navigation function Lap function Auto lap function Countdown function Auto pause function Smartphone This function automatically pauses measurement when the connection between the smartphone and smart computer is broken. Measurement resumes automatically when the connection is reestablished. * The Auto Pause settings can be accessed by tapping (MENU) > [Device].
Start measurement Switching measurement data display Simple navigation function Lap function Auto lap function Countdown function Auto pause function Power-saving mode Smart computer When smart computer is left on the [ready] (measurement standby) screen, [PAUSE] screen, or smartphone search screen for approximately 20 minutes; Cateye Cycling™ is closed; or [Connect] is turned off, the sleep display is activated.
Button lock function If you have power sensors
Start measurement Switching measurement data display Simple navigation function Lap function Auto lap function Countdown function Auto pause function Power-saving mode Button lock function Smart computer Pressing SS/LAP and OPTION simultaneously will lock the buttons, preventing accidental operation when the smart computer is stored in a pocket, etc. Repeating the same operation will unlock the buttons.
Start measurement Switching measurement data display Simple navigation function Lap function Auto lap function Countdown function Auto pause function Power-saving mode Button lock function If you have power sensors When a signal is received from a paired power sensor, power data is displayed as a value. Smart computer The power, average power, custom average power, maximum power, average lap power in real time, and power balance can be displayed on a smart computer.
Usage Instructions All activity summary It is possible to check total values for all activities saved in Cateye Cycling™ and maximum values for individual trips. Smartphone 1. Tap (MENU) and then [All Activity Summaryl].
Usage Instructions All activity summary Activity list It is possible to check individual activities (trip data and summary data collectively) saved in Cateye Cycling™. Smartphone 1. Tap (MENU) and then [Activity List]. * The Activity List can be displayed in graph, list, or calendar format. * Tapping (Select to Delete) moves to the activity deletion screen. Select the activities you want to delete and tap (Delete). 2. Tap each activity to check details or upload/delete it.
Usage Instructions All activity summary Activity list Uploading Multiple activities can be uploaded to service sites in one action. Smartphone 1. Tap (MENU) and then [Upload]. * Activities already uploaded to service sites are not displayed. 2. Select the activities you want to upload and tap (Upload) to upload them to the specified sites. * You must have an account with the relevant site to upload data. * The upload destinations for Upload All are those sites turned on under [Account].
Usage Instructions General This section explains how to configure various measurement settings. Smartphone 1. Tap (MENU) and then [General]. • Recording Interval Selects the interval at which the log is recorded. • Units Selects the measurement unit. Important If the unit is changed with the smart computer unconnected, the settings will be applied the next time the smart computer is connected. • Preset Altitude Applies a preset to the altitude of a specified position such as your home.
Usage Instructions General Device The following section explains how to pair a smart computer with a sensor and how to configure various settings. Important • Device settings are shared when smart computer is connected to your smartphone. • When using an iPhone, you cannot sync settings of commercial sensors. When measuring in Sensor Direct Mode, it is necessary to configure sensor settings separately via smart computer. 1. Switching to Sensor Direct Mode 2. Pairing a smart computer with a sensor 3.
* Paired sensors are displayed with "A" or "C" after the sensor name. A : Sensor paired with Cateye Cycling™ C: Sensor paired with a smart computer • Notification Setting Configures settings for incoming call, email, and SMS app notifications and smartphone remaining battery notification. Important Only incoming notifications for e-mail addresses registered through [Phone] and [Add Account] will be displayed.
If settings differ between devices, they will be overwritten with data from Cateye Cycling™ the next time the devices are connected. * Information on commercial sensors paired with the smart computer remains as it is. • Nickname Changes the name of the sensor. • Tire Circumference (only with a sensor capable of speed measurement) Set the tire circumference for a sensor capable of speed measurement. Select the tire circumference according to the tire size written on the side of the tire.
Device Configuring Incoming Notifications Notifications from smartphone applications and the smartphone’s remaining battery can be displayed on the smart computer. Important • Cateye Cycling notification settings are applied to applications enabled in the smartphone's notification settings. • Email notifications are shown for e-mail accounts registered in the smartphone settings. Only incoming notifications for e-mail addresses registered through [Phone] and [Add Account] will be displayed.
1. Tap [Notification Setting]. • Low Battery Notification When the smartphone battery reaches a specified amount, (remaining smartphone battery) flashes on the smart computer. • Phone / Messages / Email / Social Network When a notification arrives, [Application name] and [Contact name] (alphabetical), or [Phone number] or [Email address] flashes on the smart computer’s screen, with an audible alarm. BEEP! BEEP! BEEP! * Contact name registered with non-alphabet characters will be displayed as “Other”.
Device Designating a goal The following explains how to designate a goal in simple navigation. Smartphone Tap (MENU) > [Device] > [Smart computer name], and then follow the procedure below. 1. Tap [Simple Navigation]. Under [Simple Navigation], there are four methods for designating a goal. • Enter the address: Enter an address in the search field. • Select from a map: Swipe the map to move the location, and long-press to confirm.
Device Changing the measurement screen This section explains how to change the display of the measurement screen. Smartphone Tap (MENU) > [Device] > [Smart computer name], and then follow the procedure below. 1. Tap [Display Customization]. Here, you can verify the current screen segments and functions (measurement data). • Changing the order of screens 1 through 5: Tap [Edit] and swipe the desired screen to change the order. 2. Tap a screen to change how it is displayed.
Segments] is set to [8 segments]. • Selecting a function (measurement data): Tap [Function Names] or to select a function. • Reordering functions: Tap [Edit] and swipe the desired function to another location to change the display position. * Screen customization settings will be applied to both Mirror Mode and Sensor Direct Mode.
Usage Instructions General Device Account Set up the service sites and social networking services (SNSs) to upload your activities. 1. Tap (MENU) and then [Account]. Adjust settings for the service sites below. * You must have an account with the relevant site to upload data. Service sites ・ CATEYE Atlas™ ・ STRAVA™ ・ TRAINING PEAKS™ SNS ・ Facebook™ ・ Twitter™ * When using an SNS, links to activities uploaded to Cateye Atlas™ are posted.
Usage Instructions You can use smart computer in mirror mode or sensor direct mode depending on your preferences or the situation. Important Information for iPhone Users Mirror Mode and Sensor Direct Mode functions and display details What is Sensor Direct Mode? About screen displays Smart computer screen Start measurement Viewing activities With Cateye Cycling™, you can check and manage trip and summary data (called "activities").
• When using an iPhone, you cannot sync settings of commercial sensors. When measuring in Sensor Direct Mode, it is necessary to configure sensor settings separately via smart computer. 1. Switching to Sensor Direct Mode 2. Pairing a smart computer with a sensor 3.
Usage Instructions Important Information for iPhone Users Important Currently, some restrictions on functions that can be used with Padrone Smart+ apply to Cateye Cycling™ for iPhone. These functions will become available through updates to the Padrone Smart+ firmware and the Cateye Cycling™ app. It is recommended that users update to the most recent version of Cateye Cycling™ and Padrone Smart+ firmware whenever possible. * Areas relevant to the above are described with the mark.
Usage Instructions Functions and details displayed in Mirror Mode and Sensor Direct Mode The following functions can be used in Mirror Mode and Sensor Direct Mode.
*1 Heart rate, cadence, and power measurements require pairing with each sensor. *2 Requires separate left and right power sensors. *3 Requires a smartphone with a built-in pressure sensor.
Usage Instructions What is Sensor Direct Mode? Sensor Direct Mode refers to using smart computer as a regular cyclocomputer without your smartphone. In this case, Smart computer measures by receiving signals directly from each sensor (speed, cadence, heart rate, and power). The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by CATEYE Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners.
Usage Instructions What is Sensor Direct Mode? Smart computer screen The screen segments and display functions to be displayed on the measurement screen can be assigned through screen customization. The following explains about customizable display, using the default screen as an example. Measurement screen * To customize the screen, tap (MENU) > [Device] > [Smart computer name] > [Display Customization].
Flashing Signal being received in Sensor Direct Mode Off No signal (Pace arrows) Indicate whether the current speed is faster ( ・ ・ ・ ) or slower ( ) than the average speed. (measurement unit) Displays the currently selected measurement unit. • On Measurement stopped • Flashing Measurement in progress Measurement screen Displays various measurement data.
Usage Instructions Start measurement This section explains the measurement flow and the measurement functions. 1. Switching to Sensor Direct Mode 2. Starting/stopping measurement 3. Saving measurement data (reset operation) 4.
Start measurement 1. Switching to Sensor Direct Mode Switch from Mirror Mode to Sensor Direct Mode. Smartphone 1. Close Cateye Cycling™ or from (MENU), turn off [Connect]. Smart computer 2. From the smartphone search screen, press MODE for 1 second to switch to Sensor Direct Mode. (1 second) Smartphone search screen Measurement screen * Smart computer will search for a sensor instead of your smartphone. In this mode, the sensor icon flashes to indicate sensor reception status.
(reset operation) 4.
Start measurement 1. Switching to Sensor Direct Mode 2. Starting/stopping measurement Smart computer Measurement starts automatically when the bicycle moves. During measurement the measurement unit flashes. * The pause function is not available in Sensor Direct Mode. 3. Saving measurement data (reset operation) 4.
Start measurement 1. Switching to Sensor Direct Mode 2. Starting/stopping measurement 3. Finishing measurement (reset operation) Smart computer Reset Pressing and holding MODE when on the measurement screen generates measurement data as summary results and resets measurement data to 0. * When MODE has been pressed for 1 second, a smartphone search screen appears, but you should continue to hold down the button. * Total Distance (Odo) cannot be reset.
Start measurement 1. Switching to Sensor Direct Mode 2. Starting/stopping measurement 3. Saving measurement data (reset operation) 4. Importing summary data You can send summary data accumulated in smart computer (measurement results of sensor direct mode) to your smartphone. Important Before importing summary data, always finish smart computer measurement (reset operation). You cannot import data for which measurement has not finished. Saving measurement data (reset operation) Smartphone 1.
* The appearance of the smart computer screen depends on the state of Cateye Cycling™. * It is not possible to import data while measuring with Cateye Cycling™. Smartphone 3. Tap (MENU) and then [Activity List]. If there is summary data in smart computer, the (Import from CC) is displayed. Tapping the button imports summary data to your smartphone and updates the activity list. * This action deletes summary data from smart computer.
Start measurement Switching measurement data display Smart computer Pressing MODE switches the measurement data displayed at the bottom of the screen. * The data displayed changes depending on the state of the sensor connection and the screen customization settings. The following gives an example of initial configuration of the measurement screen.
* During initial configuration, screens 3 through 5 are undefined and thus not shown. To add screens or to change screen segments or measurement data, tap (MENU) > [Device] > [Smart computer name] > [Display Customization]. Changing the measurement screen * Measurement data and lap-related data that require use of the smartphone's GPS will not be displayed in Sensor Direct Mode.
Start measurement Switching measurement data display Power-saving mode Smart computer If there is no sensor signal nor button operation for 10 minutes, the power-saving screen is activated. If such a state continues for a further hour, the sleep display is activated. The power-saving screen returns to the measurement screen when the bicycle starts moving. When left for approx. 10 min Measurement screen Power-saving screen When left for approx.
Start measurement Switching measurement data display Power-saving mode Button lock function Smart computer Pressing SS/LAP and OPTION simultaneously will lock the buttons, preventing accidental operation when the smart computer is stored in a pocket, etc. Repeating the same operation will unlock the buttons.
Start measurement Switching measurement data display Power-saving mode Button lock function If you have power sensors When a signal is received from a paired power sensor, power data is displayed as a value. Smart computer The power, average power, custom average power, maximum power, average lap power in real time, and power balance can be displayed on a smart computer. * Separate left and right power sensors are necessary for power balance measurement.
Usage Instructions All activity summary It is possible to check total values for all activities saved in Cateye Cycling™ and maximum values for individual trips. Smartphone 1. Tap (MENU) and then [All Activity Summaryl].
Usage Instructions All activity summary Activity list It is possible to check individual activities (trip data and summary data collectively) saved in Cateye Cycling™. Smartphone 1. Tap (MENU) and then [Activity List]. * The Activity List can be displayed in graph, list, or calendar format. * Tapping (Select to Delete) moves to the activity deletion screen. Select the activities you want to delete and tap (Delete). 2. Tap each activity to check details or upload/delete it.
Usage Instructions All activity summary Activity list Uploading Multiple activities can be uploaded to service sites in one action. Smartphone 1. Tap (MENU) and then [Upload]. * Activities already uploaded to service sites are not displayed. 2. Select the activities you want to upload and tap (Upload) to upload them to the specified sites. * You must have an account with the relevant site to upload data. * The upload destinations for Upload All are those sites turned on under [Account].
Usage Instructions General This section explains how to configure various measurement settings. Smartphone 1. Tap (MENU) and then [General]. • Recording Interval Selects the interval at which the log is recorded. • Units Selects the measurement unit. Important If the unit is changed with the smart computer unconnected, the settings will be applied the next time the smart computer is connected. • Preset Altitude Applies a preset to the altitude of a specified position such as your home.
Usage Instructions General Device The following section explains how to pair a smart computer with a sensor and how to configure various settings. Important • Device settings are shared when smart computer is connected to your smartphone. • When using an iPhone, you cannot sync settings of commercial sensors. When measuring in Sensor Direct Mode, it is necessary to configure sensor settings separately via smart computer. 1. Switching to Sensor Direct Mode 2. Pairing a smart computer with a sensor 3.
A : Sensor paired with Cateye Cycling™ C: Sensor paired with a smart computer • Notification Setting Configures settings for incoming call, email, and SMS app notifications and smartphone remaining battery notification. Important Only incoming notifications for e-mail addresses registered through [Phone] and [Add Account] will be displayed. When an incoming notification is received, the display will not show the app name or the name of the sender.
Cycling™ the next time the devices are connected. * Information on commercial sensors paired with the smart computer remains as it is. • Nickname Changes the name of the sensor. • Tire Circumference (only with a sensor capable of speed measurement) Set the tire circumference for a sensor capable of speed measurement. Select the tire circumference according to the tire size written on the side of the tire.
Device Configuring Incoming Notifications Notifications from smartphone applications and the smartphone’s remaining battery can be displayed on the smart computer. Important • Cateye Cycling notification settings are applied to applications enabled in the smartphone's notification settings. • Email notifications are shown for e-mail accounts registered in the smartphone settings. Only incoming notifications for e-mail addresses registered through [Phone] and [Add Account] will be displayed.
1. Tap [Notification Setting]. • Low Battery Notification When the smartphone battery reaches a specified amount, (remaining smartphone battery) flashes on the smart computer. • Phone / Messages / Email / Social Network When a notification arrives, [Application name] and [Contact name] (alphabetical), or [Phone number] or [Email address] flashes on the smart computer’s screen, with an audible alarm. BEEP! BEEP! BEEP! * Contact name registered with non-alphabet characters will be displayed as “Other”.
Device Designating a goal The following explains how to designate a goal in simple navigation. Smartphone Tap (MENU) > [Device] > [Smart computer name], and then follow the procedure below. 1. Tap [Simple Navigation]. Under [Simple Navigation], there are four methods for designating a goal. • Enter the address: Enter an address in the search field. • Select from a map: Swipe the map to move the location, and long-press to confirm.
Device Changing the measurement screen This section explains how to change the display of the measurement screen. Smartphone Tap (MENU) > [Device] > [Smart computer name], and then follow the procedure below. 1. Tap [Display Customization]. Here, you can verify the current screen segments and functions (measurement data). • Changing the order of screens 1 through 5: Tap [Edit] and swipe the desired screen to change the order. 2. Tap a screen to change how it is displayed.
• Selecting a function (measurement data): Tap [Function Names] or to select a function. • Reordering functions: Tap [Edit] and swipe the desired function to another location to change the display position. * Screen customization settings will be applied to both Mirror Mode and Sensor Direct Mode.
Usage Instructions General Device Account Set up the service sites and social networking services (SNSs) to upload your activities. 1. Tap (MENU) and then [Account]. Adjust settings for the service sites below. * You must have an account with the relevant site to upload data. Service sites ・ CATEYE Atlas™ ・ STRAVA™ ・ TRAINING PEAKS™ SNS ・ Facebook™ ・ Twitter™ * When using an SNS, links to activities uploaded to Cateye Atlas™ are posted.
Battery replacement Smart computer When (battery icon) turns on, it is time to replace the battery. 1. Remove the battery cover and pull out the battery holder. 2. Insert two new lithium batteries (CR2032) into the battery holder, with the (+) sides facing each other. Close Battery holder Open 3. After replacing the battery, press AC on the back of the computer.
* After replacing the battery, always press RESET and check the position of the sensor relative to the magnet. Heart rate sensor (HR-12) Important If using a CATEYE sensor, the values related to the sensor's battery replacement period start flashing to indicate that it is time to replace the battery. If smart computer's heart rate display starts flashing, it is time to replace the battery. Install a new lithium battery (CR2032) so that the (+) side is visible and close the battery cover securely.
Activating the sensor Activate the sensor via the following method: • Speed sensor / Speed (cadence) sensor (ISC) / Cadence sensor Move the magnet through the sensor zone several times. (Within 3 mm) Sensor zone Magnet • Heart rate sensor Rub both electrode pads with thumbs to transmit heart rate signal. Electrode pads • Power sensor Refer to the power sensor instruction manual.
Determining tire circumference Determine tire circumference (L) by referring to the tire size chart or by measuring the actual circumference of your bicycle tire. Tire circumference reference table * The tire size or ETRTO code is indicated on the side of the tire.
Measure actual tire circumference With tire air pressure adjusted appropriately, apply a load to the bicycle. Using the valve, etc., as a marker, rotate the tire once and measure the distance traveled along the ground.
Connecting smart computer and smartphone Smartphone 1. Launch Cateye Cycling™, and from (MENU) turn on [Connect]. Smart computer 2. On the measurement screen, press MODE for 1 second to display the smartphone search screen and connect with your smartphone. When smart computer connects to a smartphone, it switches to the measurement standby display.
Power sensor calibration When the power sensor is used continuously, slight variation may occur in its unloaded state. Correct this by calibrating it periodically. When making a particularly important measurement, it is recommended that you calibrate the sensor in advance. Caution • Before starting calibration, read the power sensor instruction manuals and check the precautions for the calibration procedure. If calibration fails, accurate power measurement cannot be made.
Pairing with smart computer Pair a smart computer. Important • Pairing is necessary to use a smart computer or a sensor. • Do not pair sensors at a race venue or in similar locations where there are a lot of other users. Doing so may cause the smart computer to be paired with another device. Smart computer 1. On the measurement screen, press MODE for 1 second to display the smartphone search screen. Smartphone search screen 2.
Pairing with a sensor Smart computer can be used with sensors compatible with Bluetooth 4.0. Pair it with optional accessories or commercial sensors as required. Important • Pairing is necessary to use a smart computer or a sensor. • When using an iPhone, you cannot sync settings of commercial sensors. When measuring in Sensor Direct Mode, it is necessary to configure sensor settings separately via smart computer. 1. Switching to Sensor Direct Mode 2. Pairing a smart computer with a sensor 3.
* Requires to set tire circumference for each sensor. * You can also change sensor names and cancel pairing from this screen. Sensor pairing is now complete. * If you want to pair another sensor, repeat the same procedure again. Important Cadence, heart rate, and power data will not be displayed under the initial configuration. Change the measurement screen to be able to display measured values from paired sensors.
Switching to Sensor Direct Mode Switch from Mirror Mode to Sensor Direct Mode. Smartphone 1. Close Cateye Cycling™ or from (MENU), turn off [Connect]. Smart computer 2. From the smartphone search screen, press MODE for 1 second to switch to Sensor Direct Mode. (1 second) Measurement screen Smartphone search screen * Smart computer will search for a sensor instead of your smartphone. In this mode, the sensor icon flashes to indicate sensor reception status.
Switching to Sensor Direct Mode Pairing a smart computer with a sensor Pair a sensor that you want to use with smart computer. Important • Pairing (sensor ID synchronization) must be performed in order to use a sensor. • Do not pair sensors at a race venue or in similar locations where there are a lot of other users. Doing so may cause the smart computer to be paired with another device. • Pair all sensors that you intend to use.
• HR : Heart rate sensor • PW : Power sensor * When pairing a sensor with a smart computer, a "C" is displayed after the sensor name. Important When the smart computer displays [ID FULL] on the screen and returns to the sensor pairing screen, the maximum number of sensors have been paired. Up to 9 separate sensor IDs can be paired with the smart computer. If the maximum number of sensors have been paired, in the sensor pairing screen, press OPTION for 4 seconds to clear all pairings.
Switching to Sensor Direct Mode Pairing a smart computer with a sensor Tire circumference setting Set the tire circumference for a sensor capable of speed measurement. Important • Pairing (sensor ID synchronization) must be performed first. Pairing a smart computer with a sensor • Set tire circumference for each sensor. The default value is 2096 mm (700x23c). 1. From the measurement screen, press OPTION for 2 seconds to switch to the sensor pairing screen.
Sensor selection (1 second) Tire circumference value Increase numbers Move to next digit (1 second) * Sensors that can be selected are those that have been paired with Cateye Cycling™ or a smart computer. The letter that appears after the sensor name indicates how the sensor was paired. • A : Sensor paired with Cateye Cycling™ • C : Sensor paired with a smart computer * Error is displayed if values outside the setting range are entered. 3. Press OPTION to confirm settings.
Mounting the speed (cadence) sensor (ISC-12) The speed (cadence) sensor can be mounted either on the top or bottom of the chain stay. Caution If the speed (cadence) sensor is mounted on the bottom of the chain stay rather than on the top, the adjustment range between the sensor and the magnet will be narrower.
(1) Loosen the sensor screw using a Phillips screwdriver and check that the sensor arm moves. Sensor screw Sensor arm (2) Attach the sensor rubber pad to the sensor. Sensor rubber pad (3) Refer to the illustration and temporarily attach the sensor to the left chain stay with nylon ties. left chain stay Nylon tie Caution Do not fully tighten the nylon ties. Once the nylon ties are fully tightened they cannot be removed. 2. Temporarily attach the magnet.
(1) Using a nylon tie, temporarily attach the cadence magnet to the inside of the left crank arm so that it faces the cadence sensor zone. (2) Rotate the sensor arm and temporarily attach the wheel magnet to a spoke facing the speed sensor zone. * If the sensor cannot is not positioned so that both magnets (speed and cadence) pass through their respective sensor zones, reposition the sensor and the magnets so that each magnet passes through its sensor zone. 3.
Wearing the heart rate sensor (HR-12) Heart rate measurement is performed by wearing a heart rate sensor around the chest. Before wearing the heart rate sensor Warning Never use this device if you use a pacemaker. • To eliminate measurement errors, it is recommended to moisten the electrode pads with water or apply electrolyte cream to the pads. • If you have sensitive skin, moisten the electrode pads with water and wear it over a thin shirt. • Chest hair may interfere with measurement in some cases.
Hook Back side Electrode pads * Wear the heart rate sensor so that TOP faces up. * Ensure that the electrode pads are in close contact with your body. * If you have dry skin or are wearing the sensor over a shirt, measurement errors may result. In such cases, moisten the electrode pads with water.
Frequently Asked Questions Abnormal display General Altitude Simple navigation and compass Heart rate Power Measurement does not work In Mirror Mode In Sensor Direct Mode Cannot measure heart rate Cannot measure power Data cannot be reset On the measurement screen, press MODE for 3 seconds. Difference between "finishing a trip" and "completing measurement" What does "finishing a trip" mean? • "Finishing a trip" refers to resetting smart computer (by pressing MODE for 3 seconds).
Data is not saved Why is data sometimes not saved as summary data even after a reset operation? • Measurements for trips of 0.1 km or shorter are not saved as summary data. Data cannot be uploaded Why can't I upload activities to a service site? • Have you completed login settings for each service site? From Cateye Cycling™, tap (MENU) > [Account], and then complete login settings by entering account information for each site.
Frequently Asked Questions Abnormal display : General Measurements from a paired sensor are not displayed on the smart computer screen Heart rate, cadence, and power data will not be displayed under the initial configuration of the measurement screen. On Cateye Cycling™, tap (MENU) > [Device] > [PADRONE SMART+] > [Display Customization] to change the measurement screen so that measured values from paired sensors can be displayed.
Confirm (1 second) The smart computer will restart and switch to the smartphone search screen. MEMORY FULL is displayed on the screen The smart computer's memory is full. If you are using the smart computer linked to a smartphone, connect to Cateye Cycling™ and import summary data. This will clear the memory and the message will disappear. Screen is locked Press SS/LAP and OPTION at the same time to unlock.
Frequently Asked Questions Abnormal display : Altitude Why is there variation in measurement values for ascending altitude? As altitude measurement relies on the smartphone's GPS function, it may be different from the actual altitude.
Frequently Asked Questions Abnormal display: Simple navigation and compass The compass points the wrong way. Because the compass relies on the smartphone's GPS function, the reading may be different from the actual reading. Simple navigation cannot be displayed Did you press and hold the OPTION on the back of the smart computer? • After specifying the destination using Cateye Cycling™, press and hold the OPTION on the smart computer to display the simple navigation function.
Frequently Asked Questions Abnormal display : Heart rate Why are heart rate readings still displayed even after I take off the sensor? When using a sensor made by another company, heart rate may continue to be displayed for a long time after the sensor has been removed. Heart rate display is unstable. What should I do? The heart rate sensor may not be attached correctly. • Refer to the heart rate sensor instruction manual and attach the heart rate sensor in the correct position.
Frequently Asked Questions Abnormal display : Power Power display is not accurate. How can I fix it? Calibrate the power sensor. Power sensor calibration * Calibrate using Cateye Cycling™. In Sensor Direct Mode, connect to a smartphone and perform calibration.
Frequently Asked Questions Measurement does not work : In Mirror Mode Smart computer does not switch to Mirror Mode measurement screen. What should I do? Have you installed Cateye Cycling™ in your smartphone? • Install Cateye Cycling™. If using an iPhone If using an Android smartphone * See Cateye Cycling Recommended Devices for the latest information about smartphones recommended for use with Cateye Cycling™.
If a connection cannot be established even when set to [ON], perform pairing with the smart computer again. Solutions will vary depending on the smartphone and model. • Padrone Smart users with iPhones Remove the smart computer registered under [Settings] > [Bluetooth] on the iPhone. Then remove the smart computer once under (MENU) > [Device] in Cateye Cycling™, and perform pairing again.
Are you using a Bluetooth Smart sensor? • Smart computer can only receive signals from Bluetooth Smart sensors. The sensor battery may be flat. • Replace the battery with a new one. Battery replacement : Optional sensors The magnet may not be in the correct position relative to the speed sensor or speed (cadence) sensor (ISC). Refer to the sensor instruction manual and attach the sensor correctly.
Confirm (1 second) The smart computer will restart and switch to the smartphone search screen. The smart computer shows a blank screen after leaving the bike and then coming back to it When the smartphone moves away from the bicycle even for a short time, the smart computer may automatically enter sleep mode and show a blank screen. Clicking smart computer will make it enter smartphone search mode, allowing you to reconnect to your smartphone. Smart computer operation is abnormal.
Frequently Asked Questions Measurement does not work : In Sensor Direct Mode Why does smart computer not switch to the measurement screen? Is the smartphone icon displayed on the entire screen? • The smart computer is in Mirror Mode. Press MODE for 1 second to switch to Sensor Direct Mode. Smartphone search screen Why is the sensor signal not being received? Is [Connect] set to [ON] in the Cateye Cycling™ menu on your smartphone? • Set [Connect] to [OFF] or close Cateye Cycling™.
Mounting the speed (cadence) sensor (ISC-12) Smart computer operation is abnormal. What should I do? The following procedure explains how to restart the smart computer. 1. Press the AC button on the smart computer. The initialization screen is displayed. 2. Press MODE once to cause [RESTART] to blink, and then press MODE for 1 second. Confirm (1 second) The smart computer will restart and switch to the smartphone search screen.
Frequently Asked Questions Measurement does not work : Cannot measure heart rate Why isn't the [H] icon flashing? Have you paired the sensor? • The sensor must be paired with Cateye Cycling™ or with smart computer. Pairing with a sensor The electrode pad may have slipped out of position. • Check that the electrode pad is still in close contact with your body. Your skin may be dry. • Wet the electrode pad a little. The electrode pad may have deteriorated or become damaged due to prolonged usage.
Frequently Asked Questions Measurement does not work : Cannot measure power Why isn't the [P] icon flashing? Have you paired the sensor? • The sensor must be paired with Cateye Cycling™ or with smart computer. Pairing with a sensor The power sensor may not be attached correctly. • Refer to the power sensor instruction manual and attach the power sensor correctly.
Handling and Support Caution Smart computer / Optional sensors • Do not concentrate on smart computer or your smartphone while riding. Always ride safely. • Mount the bracket, sensor, and other components securely, and check them periodically to ensure that they are not loose. • Do not leave smart computer in direct sunlight for a long period of time. • Never disassemble smart computer. • Do not drop smart computer. Doing so may result in damage or personal injury.
160 2193 Bracket 166 5150 Lithium battery (CR2032) Optional accessories The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by CATEYE Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners.
* Battery life may be reduced depending on the number of sensors paired and usage conditions. Controller Microcomputer (Crystal controlled oscillator) Display Liquid crystal display (LCD) Current speed and cadence detection Non-contact magnetic sensor (ISC-12) * Current speed can also be measured via smartphone GPS. Sensor signal transmission/reception Bluetooth 4.0 Signal range Approx. 30 m (The range will vary depending on weather and surroundings.
2-8-25, Kuwazu, Higashi Sumiyoshi-ku, Osaka 546-0041 Japan Attn: CATEYE Customer Service Section Phone : (06)6719-6863 Fax : (06)6719-6033 E-mail : support@cateye.co.jp URL : http://www.cateye.com [For US Customers] CATEYE AMERICA, INC. 2825 Wilderness Place Suite 1200, Boulder CO 80301-5494 USA Phone : 303.443.4595 Toll Free : 800.5.CATEYE Fax : 303.473.0006 E-mail : service@cateye.
Legal Notices Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
