Operation Manual

CC-RD430DW ENG
7
Changing the computer settings [Menu screen]
PressingMENUonthemeasurementscreenchangestothemenuscreen.Varioussettingscanbechangedon
themenuscreen.
*Afterchangesaremade,besuretoregisterthesetting(s)bypressingtheMENUbutton.
*Leavingthemenuscreenwithoutanyoperationfor1minutesreturnstothemeasurementscreen,andchang-
esarenotsaved.
Measuring screen
MENU
MENU
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
Setting the upper
display
Setting the tire
circumference
Searching for
sensor ID
Setting the clock
Entering the total
distance
Selecting the
measurement unit
Setting the upper display
Selectthefunctionfortheupperdisplay.
MODE
MODE
MODE
To“SearchingforsensorID”
MODE
Setting the tire circumference
Manuallyswitchthespeedsensor / ,andenterthecircumferencesizeassignedtoeachsensor.
*Forthetirecircumference,see“Tirecircumference”(page5).
*Tochangeonlythespeedsensor,
selectthespeedsensorused,and
pressMENUtoset.
MENU
MENU
0100–3999
MODE
MODE
↔
MODE
From“Selectingthemeasurementunit”
Changing the settings
Changing the settings
(Press&hold)
(Press&hold)
(Press&hold)
Movedigits
(Press&hold)
Register the
setting
Register the
setting
Increase
thevalue
(Press&hold)
MODE