Usage Instructions Select the devices you have. * Instructions differ depending on the devices you have. * For explanatory purposes, in this manual red text/icons on the smart computer screen represent flashing items. * The display screens and illustrations used in this manual are provided for instructional purposes only. Actual screens and illustrations may differ depending on devices used. * The online manual and YouTube videos for this product are subject to change without notice.
Setup method
Setup method Setup with smartphone If you have purchased smart computer Checking package contents Setup (first time only) Mounting the bracket If you have not yet purchased smart computer Setup (first time only) Optional accessories Mounting the speed (cadence) sensor (ISC-12) Wearing the heart rate sensor (HR-12) * Mount non-CatEye sensors as directed in relevant instruction manuals.
Setup with smartphone Checking package contents Bracket Smart computer unit Bracket band Bracket rubber pad Dial * The Speed + Cadence Kit includes an integrated speed (cadence) sensor (ISC-12) in addition to the items above. * The Triple Wireless Kit includes an integrated speed (cadence) sensor (ISC-12) and a heart rate sensor (HR-12).
Setup with smartphone Checking package contents Setup When you use this device for the first time, follow the procedure below to set the smartphone and smart computer. Smart computer Pull free the smart computer's insulation sheet. After you pull free the insulation sheet, return the battery cover to its previous location. * If characters are lit on the LCD screen, you can use the product as is.
* See Cateye Cycling Recommended Devices for the latest information about smartphones recommended for use with Cateye Cycling™. 2. Launch Cateye Cycling™. Follow the on-screen instructions and allow the use of GPS and Bluetooth® devices. Important When the smartphone's Bluetooth settings are turned on, it will search for devices, but do not configure settings at this stage. Switch to Cateye Cycling™ and follow the procedure below. Once basic settings are complete the Trip screen appears. 3.
The whole display turns on and then switches to the smartphone search screen. Whole display turns on Smartphone search screen * If smart computer switches to the measurement screen without the whole screen turning on, it has not been formatted. Redo the procedure. * The appearance of the smart computer screen depends on the state of Cateye Cycling™. Smartphone When Cateye Cycling™ detects smart computer, a message is displayed on the smartphone. Tap [Pairing] to complete pairing.
When pairing is complete, smart computer switches from the smartphone search screen to the [ready] (measurement standby) display. Smartphone search screen Measurement standby Smart computer pairing is now complete. * If you have other sensors, continue pairing them. Pairing with a sensor Smart computer can be used with sensors compatible with Bluetooth 4.0. Pair it with optional accessories or commercial sensors as required. Important • Pair all sensors that you intend to use.
Setup Switching to Sensor Direct Mode Smartphone 1. Close Cateye Cycling™ or from (MENU), turn off [Connect]. Smart computer 2. Switch smart computer to Sensor Direct Mode. (1 second) Smartphone search screen Measurement screen (Sensor Direct Mode) * Smart computer will search for a sensor instead of your smartphone. In this mode, the sensor icon flashes to indicate sensor reception status.
Setup Switching to Sensor Direct Mode Pairing (Sensor ID synchronization) Pair a sensor that you want to use with smart computer. Important • Pairing (sensor ID synchronization) must be performed in order to use a sensor. • Do not pair sensors at a race venue or in similar locations where there are many other users. Doing so may cause smart computer to be paired with another sensor. • Pair all sensors that you intend to use. 1. From the measurement screen, press MENU to switch to the menu screen.
• SP : Speed sensor • ISC : Speed/cadence sensor • CD : Cadence sensor • HR : Heart rate sensor • PW : Power sensor * When pairing a sensor with a smart computer, a "C" is displayed after the sensor name. Important When smart computer displays [FULL] on the screen and returns to the menu: Up to 9 separate sensor IDs can be paired with smart computer. If the maximum number of sensors have been paired, with the computer in pairing standby state, press MENU for 4 seconds to clear all pairings.
Setup Switching to Sensor Direct Mode Pairing (Sensor ID synchronization) Tire circumference setting Set the tire circumference for a sensor capable of speed measurement. Important • Pairing (sensor ID synchronization) must be performed first. Pairing (Sensor ID synchronization) • Set tire circumference for each sensor. The default value is 2,096 mm (700x23c). 1. From the measurement screen, press MENU to switch to the menu screen.
Sensor selection (2 seconds) (2 seconds) Tire circumference value Increase numbers Move to next digit (2 seconds) * Sensors that can be selected are those that have been paired with Cateye Cycling™ or a smart computer. The letter that appears after the sensor name indicates how the sensor was paired. • A : Sensor paired with Cateye Cycling™ • C : Sensor paired with a smart computer * Error is displayed if values outside the setting range are entered. 4. Press MENU to confirm settings.
Setup with smartphone Checking package contents Setup Mounting the bracket The bracket can be mounted on either the stem or the handlebar. Watch video See illustrations • When mounting on the stem • When mounting on the handlebar • Mounting and removing the smart computer unit !When mounting on the stem 1. Check bracket orientation and attach it to the bracket band. Bracket band Bracket 2. Remove the seal from the bracket rubber pad and stick the bracket rubber pad onto the bracket band.
Dial Cut Caution • Always tighten the dial by hand. Using a tool or other object to tighten the dial may crush the screw thread. • Trim bracket band carefully so the cut end will not cause injury (see step 3 above). !When mounting on the handlebar 1. Check bracket orientation and attach it to the bracket band. Bracket Bracket band 2. Remove the seal from the bracket rubber pad and stick the bracket rubber pad onto the bracket band. Bracket rubber pad 3.
Removing Mounting While holding smart computer Click Push out Caution To remove smart computer, push out while holding the unit with the other hand to ensure that it does not fall.
Setup with smartphone Setup Cateye Cycling™, Cateye's free smartphone app, records trip data using your smartphone's GPS. By combining the app with a Bluetooth sensor, it is also possible to reliably measure heart rate, cadence, and other data as well as current speed. 1. Install Cateye Cycling™. If using an iPhone If using an Android smartphone * See Cateye Cycling Recommended Devices for the latest information about smartphones recommended for use with Cateye Cycling™. 2. Launch Cateye Cycling™.
• Pair all sensors that you intend to use. If you want to pair another sensor, repeat the same procedure again. 1. Pair with a sensor. From (MENU) at the top left of the screen, turn on [Connect], and then tap [Device]. Tap [Device Pairing] to start pairing. 2. Activate the sensor. Activating the sensor When Cateye Cycling™ detects the sensor signal, a message is displayed on the smartphone. Tap [Pair]. The verified sensor is displayed on the [Device] screen and pairing is completed.
Setup with smartphone Mounting the speed (cadence) sensor (ISC-12) The speed (cadence) sensor can be mounted either on the top or bottom of the chain stay. Caution If the speed (cadence) sensor is mounted on the bottom of the chain stay rather than on the top, the adjustment range between the sensor and the magnet will be narrower.
Sensor screw Sensor arm (2) Attach the sensor rubber pad to the sensor. Sensor rubber pad (3) Refer to the illustration and temporarily attach the sensor to the left chain stay with nylon ties. left chain stay Nylon tie Caution Do not fully tighten the nylon ties. Once the nylon ties are fully tightened they cannot be removed. 2. Temporarily attach the magnet.
the speed sensor zone. * If the sensor cannot is not positioned so that both magnets (speed and cadence) pass through their respective sensor zones, reposition the sensor and the magnets so that each magnet passes through its sensor zone. 3. Adjust the gap between the sensor zone and the magnet. (1) Tilt the sensor so that the gap between the cadence magnet and the cadence sensor zone is approximately 3 mm, then fasten the sensor securely with nylon ties.
Setup with smartphone Wearing the heart rate sensor (HR-12) Heart rate measurement is performed by wearing a heart rate sensor around the chest. Before wearing the heart rate sensor Warning Never use this device if you use a pacemaker. • To eliminate measurement errors, it is recommended to moisten the electrode pads with water or apply electrolyte cream to the pads. • If you have sensitive skin, moisten the electrode pads with water and wear it over a thin shirt.
* Wear the heart rate sensor so that TOP faces up. * Ensure that the electrode pads are in close contact with your body. * If you have dry skin or are wearing the sensor over a shirt, measurement errors may result. In such cases, moisten the electrode pads with water.
Setup method Setup without smartphone Setup without smartphone Checking package contents Setup (first time only) Mounting the bracket Optional accessories Mounting the speed (cadence) sensor (ISC-12) Wearing the heart rate sensor (HR-12) * Mount non-CatEye sensors as directed in relevant instruction manuals.
Setup without smartphone Checking package contents Bracket Smart computer unit Bracket band Bracket rubber pad Dial * The Speed + Cadence Kit includes an integrated speed (cadence) sensor (ISC-12) in addition to the items above. * The Triple Wireless Kit includes an integrated speed (cadence) sensor (ISC-12) and a heart rate sensor (HR-12).
Setup without smartphone Checking package contents Setup Set up smart computer according to the procedure below when using it for the first time. Button operation Check button locations before starting set up. Padrone Smart Back Strada Smart Back Pull free the smart computer's insulation sheet. After you pull free the insulation sheet, return the battery cover to its previous location. * If characters are lit on the LCD screen, you can use the product as is.
The whole display turns on and then switches to the smartphone search screen. Whole display turns on Smartphone search screen Press MENU to proceed to the next step. * If smart computer switches to the measurement screen without the whole screen turning on, it has not been formatted. Redo the procedure. 2. Display the desired measurement unit. Press MENU to proceed to the next step. 3. Pair a sensor. Smart computer can be used with sensors compatible with Bluetooth 4.0.
Ready for synchronization Sensor activated Synchronization complete The synchronized sensor is displayed on the top of the screen and pairing is completed. • SP : Speed sensor • ISC : Speed/cadence sensor • CD : Cadence sensor • HR : Heart rate sensor • PW : Power sensor * When pairing a sensor with a smart computer, a "C" is displayed after the sensor name. * To pair another sensor, press MODE for 2 seconds to return to the synchronization standby screen, and repeat the same procedure.
5. Set the time display mode and the time. Time display mode Select 24 h Select 12 h (2 seconds) (2 seconds) AM/PM (2 seconds) Hours Increase number (2 seconds) (2 seconds) Minutes Increase number Pressing MENU switches to the measurement screen. Setup is now complete.
Setup without smartphone Checking package contents Setup Mounting the bracket The bracket can be mounted on either the stem or the handlebar. Watch video See illustrations • When mounting on the stem • When mounting on the handlebar • Mounting and removing the smart computer unit !When mounting on the stem 1. Check bracket orientation and attach it to the bracket band. Bracket band Bracket 2. Remove the seal from the bracket rubber pad and stick the bracket rubber pad onto the bracket band.
Dial Cut Caution • Always tighten the dial by hand. Using a tool or other object to tighten the dial may crush the screw thread. • Trim bracket band carefully so the cut end will not cause injury (see step 3 above). !When mounting on the handlebar 1. Check bracket orientation and attach it to the bracket band. Bracket Bracket band 2. Remove the seal from the bracket rubber pad and stick the bracket rubber pad onto the bracket band. Bracket rubber pad 3.
Mounting Removing While holding smart computer Click Push out Caution To remove smart computer, push out while holding the unit with the other hand to ensure that it does not fall.
Setup without smartphone Mounting the speed (cadence) sensor (ISC-12) The speed (cadence) sensor can be mounted either on the top or bottom of the chain stay. Caution If the speed (cadence) sensor is mounted on the bottom of the chain stay rather than on the top, the adjustment range between the sensor and the magnet will be narrower.
Sensor screw Sensor arm (2) Attach the sensor rubber pad to the sensor. Sensor rubber pad (3) Refer to the illustration and temporarily attach the sensor to the left chain stay with nylon ties. left chain stay Nylon tie Caution Do not fully tighten the nylon ties. Once the nylon ties are fully tightened they cannot be removed. 2. Temporarily attach the magnet.
the speed sensor zone. * If the sensor cannot is not positioned so that both magnets (speed and cadence) pass through their respective sensor zones, reposition the sensor and the magnets so that each magnet passes through its sensor zone. 3. Adjust the gap between the sensor zone and the magnet. (1) Tilt the sensor so that the gap between the cadence magnet and the cadence sensor zone is approximately 3 mm, then fasten the sensor securely with nylon ties.
Setup without smartphone Wearing the heart rate sensor (HR-12) Heart rate measurement is performed by wearing a heart rate sensor around the chest. Before wearing the heart rate sensor Warning Never use this device if you use a pacemaker. • To eliminate measurement errors, it is recommended to moisten the electrode pads with water or apply electrolyte cream to the pads. • If you have sensitive skin, moisten the electrode pads with water and wear it over a thin shirt.
* Wear the heart rate sensor so that TOP faces up. * Ensure that the electrode pads are in close contact with your body. * If you have dry skin or are wearing the sensor over a shirt, measurement errors may result. In such cases, moisten the electrode pads with water.
Smartphone and smart computer You can use smart computer in mirror mode or sensor direct mode depending on your preferences or the situation. What is Mirror Mode? Mirror Mode refers to syncing smart computer with Cateye's smartphone app, Cateye Cyling™. By using smart computer with Cateye Cycling™, you can connect smart computer and optional/commercial sensors (speed, cadence, heart rate, and power) with your smartphone, and record log information including your smartphone's GPS function while you measure.
Smart computer screen Cateye Cycling™ screen Start measurement Connecting smartphone and smart computer Measurement Saving and uploading trips Viewing Data With Cateye Cycling™, you can check and manage trip and summary data (called "activities"). Checking activity totals Checking activities Uploading all activities Changing settings Cateye Cycling™ can be used to configure all settings for smart computer and connected devices.
Smartphone and smart computer Smart computer screen Padrone Smart Strada Smart Details displayed: Data displayed at top of screen Displays current speed. In Mirror Mode, when a phone call is received, the number at the far right rotates. * Can be changed to display heart rate or cadence. Device : Smart computer : Customize screen Current function Measured values change every time MODE is pressed.
Explanation of icons: (Battery alarm) Flashes when smart computer's remaining battery power is low. When this icon flashes, replace batteries as soon as possible. Battery replacement : Smart computer (Memory alarm) Turns on when smart computer's remaining memory is low. After the icon turns on, the oldest summary data is deleted to create space to record new data. * Memory is used to record summary data in Sensor Direct Mode. * Memory can be cleared by importing summary data into Cateye Cycling™.
* It is necessary to configure email account settings to receive incoming email. General : Notification Settings Measurement : Pausing / reset operation • • • (Measurement unit) Displays the currently selected measurement unit. • On Measurement stopped • Flashing Measurement in progress (Average) Indicates that the currently displayed value is an average value. (Maximum) Indicates that the currently displayed value is a maximum value. Current function Indicates the currently displayed function.
Smartphone and smart computer Cateye Cycling™ [Trip] screen This is the Cateye Cycling™ home screen. From this screen you can start, pause, and finish measurement. * Starting, pausing, and finishing measurement can be done remotely from the smart computer unit. * Measurement data is displayed as – if sensor signal cannot be received. Menu button Displays the menu. Device connection status icon Displays connection status with other devices.
Displays the number of temporarily saved trips. Important The maximum number of trips that can be saved temporarily is 30. If this number is exceeded, the icon changes to and it is not possible to temporarily save any more trips. It is recommended that trip data is saved and uploaded regularly. GPS icon Indicates GPS signal reception status. Calibration button Performs power sensor calibration.
Smartphone and smart computer Connecting smartphone and smart computer Smartphone 1. Launch Cateye Cycling™, and from (MENU) turn on [Connect]. Smart computer 2. On the measurement screen, press MODE for 1 second to display the smartphone search screen and connect with your smartphone. When smart computer connects to a smartphone, it switches to the measurement standby display.
Smartphone and smart computer Connecting smart computer and smartphone Measurement Important • Smartphone use When measuring, turn the smartphone display off, and with Cateye Cycling™ running, store the smartphone in a safe place such as a bag or pocket. As measurement start/pause/resume and reset operations (finish trip) can be performed remotely from smart computer, there is no need to take out your smartphone until you want to save or upload trips.
Finishing measurement (reset operation) Smart computer Pressing MODE for 3 seconds finishes measurement. Trip data is saved temporarily on the smartphone and measurement values are reset. The screen changes to the [ready] display, ready to start the next measurement.
* Heart rate and cadence data will not be displayed unless each sensor is paired. Auto pause function Smart computer This function automatically pauses measurement when the connection between the smartphone and smart computer is broken. Measurement resumes automatically when the connection is reestablished.
Smart computer When smart computer is left on the [ready] (measurement standby) screen, [PAUSE] screen, or smartphone search screen for approximately 20 minutes; Cateye Cycling™ is closed; or [Connect] is turned off, the sleep display is activated. When MODE is pressed, smart computer returns to the smartphone search screen and then returns to the measurement screen when the connection with the smartphone is reestablished. When left for approx.
* To increase precision, it is recommended to perform calibration before power measurement.
Smartphone and smart computer Connecting smart computer and smartphone Measurement Saving and uploading trips Smartphone 1. On the Trip screen, tap (flag) to finish measurement. The app switches to the upload screen. 2. Turn on an upload destination. * Trip names can be edited. * You must have an account with the relevant site to upload data. Account * Cateye Cycling™ only allows you to post links of trips uploaded to CATEYE Atlas™ on Facebook™ and Twitter™.
Smartphone and smart computer Checking activity totals Smartphone 1. Tap (MENU) and then [All Activity Summary]. * It is possible to check total values for all activities saved with Cateye Cycling™ and maximum values for individual trips.
Smartphone and smart computer Checking activity totals Checking activities You can check activities (the collective term for trip data and summary data) from the Activity List. Smartphone 1. Tap (MENU) and then [Activity List]. * The Activity List can be displayed in graph, list, or calendar format. * Tapping (Select to Delete) moves to the activity deletion screen. Select the activities you want to delete and tap (Delete). 2. Tap each activity to check details or upload/delete it.
Smartphone and smart computer Checking activity totals Checking activities Uploading all activities All activities can be uploaded to service sites in one action. Smartphone 1. Tap (MENU) and then [Upload]. * Activities already uploaded to service sites are not displayed. 2. Select the activities you want to upload and tap (Upload) to upload them to the specified sites. * You must have an account with the relevant site to upload data.
Smartphone and smart computer General Adjust various settings related to Mirror Mode. Smartphone 1. Tap (MENU) and then [General]. • Recording Interval Selects the interval at which the log is recorded. • Notification Settings Configures settings for incoming call notification (phone/email/SMS) and smartphone remaining battery notification. * SMS received notification feature is only available on Padrone Smart.
Smartphone and smart computer General Device Configure settings for connected devices (Smart computer and sensors). Important • Device settings are shared when smart computer is connected to your smartphone. If settings differ, you will be prompted to select which settings to sync. • When using an iPhone, you cannot sync settings of commercial sensors. When measuring in Sensor Direct Mode, it is necessary to configure sensor settings separately via smart computer. Smartphone 1.
new smart computer or when resetting smart computer. • Clock Lets you switch between 12-hour and 24-hour time display. SENSOR Important These settings can be configured even when your smartphone is not connected to smart computer. If settings differ between devices, the next time you connect you will be prompted to select which settings to apply. Tire circumference Enter the tire circumference for a sensor capable of speed measurement.
Smartphone and smart computer General Device Account Set which service sites and social networking services (SNSs) activities are uploaded to. 1. Tap (MENU) and then [Account]. Adjust settings for the service sites below. * You must have an account with the relevant site to upload data. Service sites ・ CATEYE Atlas™ ・ STRAVA™ ・ TRAINING PEAKS™ SNS ・ Facebook™ ・ Twitter™ * When using an SNS, links to activities uploaded to Cateye Atlas™ are posted.
Smartphone and smart computer You can use smart computer in mirror mode or sensor direct mode depending on your preferences or the situation. What is Sensor Direct Mode? Sensor Direct Mode refers to using smart computer as a regular cyclocomputer without your smartphone. In this case, Smart computer measures by receiving signals directly from each sensor (speed, cadence, heart rate, and power). The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by CATEYE Co.
Checking activity totals Checking activities Uploading all activities Importing summary data measured in Sensor Direct Mode Changing settings Cateye Cycling™ can be used to configure all settings for smart computer and connected devices. * When a smartphone is connected, if Cateye Cylcling™ and smart computer settings differ, you must choose which settings to sync. Important • When a smartphone is connected, if Cateye Cylcling™ and smart computer settings differ, you must choose which settings to sync.
Smartphone and smart computer Smart computer screen Padrone Smart Strada Smart Details displayed: Data displayed at top of screen Displays current speed. * Can be changed to display heart rate or cadence. Device : Smart computer : Display Customization Current function Measured values change every time MODE is pressed. * If the values flash on and off, it is time to replace the sensor battery.
(Battery alarm) Flashes when smart computer's remaining battery power is low. When this icon flashes, replace batteries as soon as possible. Battery replacement : Smart computer (Memory alarm) Turns on when smart computer's remaining memory is low. After the icon turns on, the oldest summary data is deleted to create space to record new data. * Memory is used to record summary data in Sensor Direct Mode. * Memory can be cleared by importing summary data into Cateye Cycling™.
• (Elapsed Time) • (Heart Rate) • • • (Trip Distance) (Trip Distance 2) (Current Speed) • (Cadence) • (Power) • (Clock)
Smartphone and smart computer Switching to Sensor Direct Mode Smartphone 1. Close Cateye Cycling™ or from (MENU), check that [Connect] is turned off. Smart computer 2. From the smartphone search screen, press MODE for 1 second to switch to Sensor Direct Mode. (1 second) Smartphone search screen Measurement screen (Sensor Direct Mode) * Smart computer will search for a sensor instead of your smartphone. In this mode, the sensor icon flashes to indicate sensor reception status.
Smartphone and smart computer Switching to Sensor Direct Mode Starting/stopping measurement Starting/stopping measurement Smart computer Measurement starts automatically when the bicycle moves. During measurement the measurement unit flashes. * The pause function is not available in Sensor Direct Mode. Saving measurement data (reset operation) Smart computer Pressing and holding MODE when on the measurement screen generates Reset measurement data as summary results and resets measurement data to 0.
Smart computer Pressing MODE switches the measurement data displayed at the bottom of the screen. * The data displayed changes depending on the state of the sensor connection.
* Heart rate and cadence data will not be displayed unless each sensor is paired. *Average values are displayed as .E instead of the measurement value when Elapsed Time exceeds approximately 27 hours. Average speed is also displayed as .E instead of the measurement value when Trip Distance exceeds 1,000 km [620 mile]. Reset smart computer and start measurement again to enable average value measurement.
* When the power value exceeds 999, the last three digits are displayed. * To increase precision, it is recommended to perform calibration before power measurement.
Smartphone and smart computer Checking activity totals Smartphone 1. Tap (MENU) and then [All Activity Summary]. * It is possible to check total values for all activities saved with Cateye Cycling™ and maximum values for individual trips.
Smartphone and smart computer Checking activity totals Checking activities You can check activities (the collective term for trip data and summary data) from the Activity List. Smartphone 1. Tap (MENU) and then [Activity List]. * The Activity List can be displayed in graph, list, or calendar format. * Tapping (Select to Delete) moves to the activity deletion screen. Select the activities you want to delete and tap (Delete). 2. Tap each activity to check details or upload/delete it.
Smartphone and smart computer Checking activity totals Checking activities Uploading all activities All activities can be uploaded to service sites in one action. Smartphone 1. Tap (MENU) and then [Upload]. * Activities already uploaded to service sites are not displayed. 2. Select the activities you want to upload and tap (Upload) to upload them to the specified sites. * You must have an account with the relevant site to upload data.
Smartphone and smart computer Checking activity totals Checking activities Uploading all activities Importing summary data You can send summary data accumulated in smart computer (measurement results of sensor direct mode) to your smartphone. Important Before importing summary data, always finish smart computer measurement (reset operation). You cannot import data for which measurement has not finished. Reset operation Smartphone 1. Launch Cateye Cycling™, and from (MENU) turn on [Connect].
* It is not possible to import data while measuring with Cateye Cycling™. Smartphone 3. Tap (MENU) and then [Activity List]. If there is summary data in smart computer, the (Import from CC) is displayed. Tapping the button imports summary data to your smartphone and updates the activity list. * This action deletes summary data from smart computer. * After importing summary data, it is recommended that you turn off [Connect] from (MENU) to minimize smartphone battery drain.
Smartphone and smart computer General Adjust various settings related to Mirror Mode. Smartphone 1. Tap (MENU) and then [General]. • Recording Interval Selects the interval at which the log is recorded. • Notification Settings Configures settings for incoming call notification (phone/email/SMS) and smartphone remaining battery notification. * SMS received notification feature is only available on Padrone Smart.
Smartphone and smart computer General Device Configure settings for connected devices (Smart computer and sensors). Important • Device settings are shared when smart computer is connected to your smartphone. If settings differ, you will be prompted to select which settings to sync. • When using an iPhone, you cannot sync settings of commercial sensors. When measuring in Sensor Direct Mode, it is necessary to configure sensor settings separately via smart computer. Smartphone 1.
Lets you manually set total distance traveled. * Use this function when you want to continue from the same distance after purchasing a new smart computer or when resetting smart computer. • Clock Lets you switch between 12-hour and 24-hour time display. SENSOR Important These settings can be configured even when your smartphone is not connected to smart computer. If settings differ between devices, the next time you connect you will be prompted to select which settings to apply.
Smartphone and smart computer General Device Account Set which service sites and social networking services (SNSs) activities are uploaded to. 1. Tap (MENU) and then [Account]. Adjust settings for the service sites below. * You must have an account with the relevant site to upload data. Service sites ・ CATEYE Atlas™ ・ STRAVA™ ・ TRAINING PEAKS™ SNS ・ Facebook™ ・ Twitter™ * When using an SNS, links to activities uploaded to Cateye Atlas™ are posted.
Smartphone and smart computer Pairing (Sensor ID synchronization) Pair a sensor that you want to use with smart computer. Important • Pairing (sensor ID synchronization) must be performed in order to use a sensor. • Do not pair sensors at a race venue or in similar locations where there are many other users. Doing so may cause smart computer to be paired with another sensor. • Pair all sensors that you intend to use. 1. From the measurement screen, press MENU to switch to the menu screen.
Up to 9 separate sensor IDs can be paired with smart computer. If the maximum number of sensors have been paired, with the computer in pairing standby state, press MENU for 4 seconds to clear all pairings. * Pairing standby time is 5 minutes. Activate the sensor within this time. 4. Press MENU to confirm pairing. If you want to continue pairing another sensor, repeat the same operations again. Pressing MENU again returns to the measurement screen.
Smartphone and smart computer Pairing (Sensor ID synchronization) Tire circumference setting Set the tire circumference for a sensor capable of speed measurement. Important • Pairing (sensor ID synchronization) must be performed first. Pairing (Sensor ID synchronization) • Set tire circumference for each sensor. The default value is 2,096 mm (700x23c). 1. From the measurement screen, press MENU to switch to the menu screen.
Sensor selection (2 seconds) (2 seconds) Tire circumference value Increase numbers Move to next digit (2 seconds) * Only paired sensors can be selected. * Error is displayed if values outside the setting range are entered. 4. Press MENU to confirm settings. Pressing MENU again returns to the measurement screen. * If you have changed settings, always press MENU to confirm changes.
Smart computer Outline You can use smart computer as a regular cyclocomputer. This is referred to as "Sensor Direct Mode". In Sensor Direct Mode, smart computer measures by receiving signals from each sensor (speed, cadence, heart rate, and power). The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by CATEYE Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners.
Smart computer Smart computer screen Padrone Smart Strada Smart Details displayed: Data displayed at top of screen Displays current speed. * Can be changed to display heart rate or cadence. Display settings for top of screen Current function Measured values change every time MODE is pressed. * If the values flash on and off, it is time to replace the sensor battery.
Flashes when smart computer's remaining battery power is low. When this icon flashes, replace batteries as soon as possible. Battery replacement : Smart computer (Memory alarm) This information is required when syncing with a smartphone. Measurement is not affected if this icon turns on. (Pace arrows) Indicate whether the current speed is faster ( ) or slower ( ) than the average speed. (Sensor signal icon) Indicates the Bluetooth® sensor's signal reception status.
• (Current Speed) • (Cadence) • (Power) • (Clock)
Smart computer Starting/stopping measurement Starting/stopping measurement Measurement starts automatically when the bicycle moves. During measurement the measurement unit flashes. Reset operation Reset Pressing and holding MODE when on the measurement screen resets measurement data to 0. * When MODE has been pressed for 1 second, a smartphone search screen appears, but you should continue to hold down the button.
* Heart rate and cadence data will not be displayed unless each sensor is paired. *Average values are displayed as .E instead of the measurement value when Elapsed Time exceeds approximately 27 hours. Average speed is also displayed as .E instead of the measurement value when Trip Distance exceeds 1,000 km [620 mile]. Reset smart computer and start measurement again to enable average value measurement.
Reset operation Power-saving mode If there is no sensor signal or button operation for 10 minutes, the power-saving screen is activated. If such a state continues for a further hour, the sleep display is activated. The power-saving screen returns to the measurement screen when the bicycle starts moving. When left for approx. 10 min Measurement screen Power-saving screen When left for approx.
Smart computer Clock setting 1. From the measurement screen, press MENU to switch to the menu screen. Measurement screen Menu screen (Clock setting) * When the menu screen is left on for 1 minute, smart computer returns to the measurement screen. 2. Check that (clock icon) is flashing, and press MODE for 2 seconds. (2 seconds) 3. Set the time display mode and the time.
Time display mode Select 24 h Select 12 h (2 seconds) (2 seconds) AM/PM (2 seconds) Hours Increase number (2 seconds) (2 seconds) Minutes Increase number 4. Press MENU to confirm settings. Pressing MENU again returns to the measurement screen. * If you have changed settings, always press MENU to confirm changes.
Smart computer Clock setting Tire circumference setting Set the tire circumference for a sensor capable of speed measurement. Important • Pairing (sensor ID synchronization) must be performed first. Pairing (Sensor ID synchronization) • Set tire circumference for each sensor. The default value is 2,096 mm (700x23c). 1. From the measurement screen, press MENU to switch to the menu screen.
Sensor selection (2 seconds) (2 seconds) Tire circumference value Increase numbers Move to next digit (2 seconds) * Sensors that can be selected are those that have been paired with Cateye Cycling™ or a smart computer. The letter that appears after the sensor name indicates how the sensor was paired. • A : Sensor paired with Cateye Cycling™ • C : Sensor paired with a smart computer * Error is displayed if values outside the setting range are entered. 4. Press MENU to confirm settings.
Smart computer Clock setting Tire circumference setting Pairing (Sensor ID synchronization) Pair a sensor that you want to use with smart computer. Important • Pairing (sensor ID synchronization) must be performed in order to use a sensor. • Do not pair sensors at a race venue or in similar locations where there are many other users. Doing so may cause smart computer to be paired with another sensor. • Pair all sensors that you intend to use. 1.
The synchronized sensor is displayed on the top of the screen and pairing is completed. • SP : Speed sensor • ISC : Speed/cadence sensor • CD : Cadence sensor • HR : Heart rate sensor • PW : Power sensor * When pairing a sensor with a smart computer, a "C" is displayed after the sensor name. Important When smart computer displays [FULL] on the screen and returns to the menu: Up to 9 separate sensor IDs can be paired with smart computer.
Smart computer Clock setting Tire circumference setting Pairing (Sensor ID synchronization) Switch top of screen display You can choose to display current speed, cadence, or heart rate at the top of the screen. Important Measurement items that require a sensor that is not paired cannot be selected. 1. From the measurement screen, press MENU to switch to the menu screen.
Current speed Cadence Heart rate Cadence Current speed Heart rate Heart rate Cadence Current speed 4. Press MENU to confirm settings. Pressing MENU again returns to the measurement screen. * If you have changed settings, always press MENU to confirm changes.
Smart computer Clock setting Tire circumference setting Pairing (Sensor ID synchronization) Switch top of screen display Function setting It is possible to skip certain functions displayed at the bottom of the screen. 1. From the measurement screen, press MENU to switch to the menu screen. Measurement screen Menu screen (Clock settings) * When the menu screen is left on for 1 minute, smart computer returns to the measurement screen. 2.
(2 seconds) * Current speed, elapsed time, heart rate, cadence, and power cannot be skipped. 4. Press MENU to confirm settings. Pressing MENU again returns to the measurement screen. * If you have changed settings, always press MENU to confirm changes.
Smart computer Clock setting Tire circumference setting Pairing (Sensor ID synchronization) Switch top of screen display Function setting Total distance manual input If you enter a desired value for total distance, you can start your next trip from that value. * This function is useful when you want to continue from the same distance after purchasing a new smart computer or when resetting smart computer. 1. From the measurement screen, press MENU to switch to the menu screen.
Increase number Move to next digit (2 seconds) 4. Press MENU to confirm settings. Pressing MENU again returns to the measurement screen. *If you have changed settings, always press MENU to confirm changes.
Smart computer Clock setting Tire circumference setting Pairing (Sensor ID synchronization) Switch top of screen display Function setting Total distance manual input Measurement unit setting You can select the measurement unit (km or miles). 1. From the measurement screen, press MENU to switch to the menu screen. Measurement screen Menu screen (Clock setting) * When the menu screen is left on for 1 minute, smart computer returns to the measurement screen. 2.
4. Press MENU to confirm settings. Pressing MENU again returns to the measurement screen. * If you have changed settings, always press MENU to confirm changes. * When the measurement unit is changed, existing measurement data is automatically converted to the new unit.
Smartphone (App Only) 1 2 3
Smartphone (App Only) 1 2 3
Smartphone (App Only) 1 2 3
Battery replacement ! Smart computer Padrone Smart When (battery icon) turns on, it is time to replace the battery. Install a new lithium battery (CR2032) with the (+) side facing upward. Close Open * After replacing the battery, press AC on the back of the computer. (Restart operation) Strada Smart When (battery icon) turns on, it is time to replace the battery. Install a new lithium battery (CR2032) with the (+) side facing upward.
! Optional sensors Speed (cadence) sensor (ISC-12) Important If using a CATEYE sensor, the values related to the sensor's battery replacement period start flashing to indicate that it is time to replace the battery. If smart computer's current speed or cadence display starts flashing, it is time to replace the battery. Install a new lithium battery (CR2032) so that the (+) side is visible and close the battery cover securely.
Activating the sensor Activate the sensor via the following method: • Speed sensor / Speed (cadence) sensor (ISC) / Cadence sensor Move the magnet through the sensor zone several times. (Within 3 mm) Sensor zone Magnet • Heart rate sensor Rub both electrode pads with thumbs to transmit heart rate signal. Electrode pads • Power sensor Refer to the power sensor instruction manual.
Determining tire circumference Determine tire circumference (L) by referring to the tire size chart or by measuring the actual circumference of your bicycle tire. Tire circumference reference table * The tire size or ETRTO code is indicated on the side of the tire.
Measure actual tire circumference With tire air pressure adjusted appropriately, apply a load to the bicycle. Using the valve, etc., as a marker, rotate the tire once and measure the distance traveled along the ground.
Power sensor calibration When the power sensor is used continuously, slight variation may occur in its unloaded state. Correct this by calibrating it periodically. When making a particularly important measurement, it is recommended that you calibrate the sensor in advance. Caution • Before starting calibration, read the power sensor instruction manuals and check the precautions for the calibration procedure. If calibration fails, accurate power measurement cannot be made.
Power sensor calibration When the power sensor is used continuously, slight variation may occur in its unloaded state. Correct this by calibrating it periodically. When making a particularly important measurement, it is recommended that you calibrate the sensor in advance. Caution • Before starting calibration, read the power sensor instruction manuals and check the precautions for the calibration procedure. If calibration fails, accurate power measurement cannot be made.
Frequently Asked Questions Abnormal display General Altitude Heart rate Power Measurement does not work In Mirror Mode In Sensor Direct Mode Cannot measure heart rate Cannot measure power Data cannot be reset On the measurement screen, press MODE for 3 seconds. Difference between "finishing a trip" and "completing measurement" What does "finishing a trip" mean? • "Finishing a trip" refers to resetting smart computer (by pressing MODE for 3 seconds).
Why can't I upload activities to a service site? • Have you completed login settings for each service site? From Cateye Cycling™, tap (Menu) - [Account], and then complete login settings by entering account information for each site. Why does my smartphone battery drain so quickly? Have you been leaving [Connect] turned on in Cateye Cycling™ even when you are not performing measurement? • It is recommended that you turn off [Connect] from smartphone battery drain.
Frequently Asked Questions Abnormal display : General Why is the display blank? The battery is flat. Replace the battery with a new one. Battery replacement : Smart computer The display is behaving abnormally. How do I fix it? The display may be abnormal if there is something that emits radio waves (such as railway tracks or a TV transmitter station) in the vicinity. Move away from the possible cause, reset smart computer (press MODE for 3 seconds), and start measurement again. The screen is frozen.
Frequently Asked Questions Abnormal display : Heart rate Why are heart rate readings still displayed even after I take off the sensor? When using a sensor made by another company, heart rate may continue to be displayed for a long time after the sensor has been removed. Heart rate display is unstable. What should I do? The heart rate sensor may not be attached correctly. • Refer to the heart rate sensor instruction manual and attach the heart rate sensor in the correct position.
Frequently Asked Questions Abnormal display : Power Power display is not accurate. How can I fix it? Calibrate the power sensor.
Frequently Asked Questions Abnormal display : Altitude Why is there variation in measurement values for ascending altitude? As altitude measurement relies on the smartphone's GPS function, it may be different from the actual altitude.
Frequently Asked Questions Measurement does not work : In Mirror Mode Smart computer does not switch to Mirror Mode measurement screen. What should I do? Have you installed Cateye Cycling™ in your smartphone? • Install Cateye Cycling™. If using an iPhone If using an Android smartphone * See Cateye Cycling Recommended Devices for the latest information about smartphones recommended for use with Cateye Cycling™.
Press MODE for 1 second. Smart computer displays Tm, and you will be able to start measurement. Tapping the (Start Measurement) in Cateye Cycling™ has the same effect. Measurement standby Display alternates between PAUSE and Trip Distance, and measurement does not start. What is the problem? Measurement is paused. Press MODE for 1 second to resume measurement.
The location or weather may not be appropriate for acquiring a GPS signal. • If your smartphone's GPS connection is lost, smart computer can no longer perform measurement. * For information on how to acquire a GPS signal, refer to your smartphone instruction manual. I lost the connection between my smartphone and a connected device (smart computer or sensor). How do I reconnect them? If you cannot reconnect to the sensor Press the reset button on the sensor.
Frequently Asked Questions Measurement does not work : In Sensor Direct Mode Why does smart computer not switch to the measurement screen? Is the display at the bottom of the screen going round and round? • Press MODE for 1 second. Smart computer will switch to the Sensor Direct Mode measurement screen. Why is the sensor signal not being received? (When using Cateye Cycling™) Is [Connect] set to [ON] in the Cateye Cycling™ menu on your smartphone? • Set [Connect] to [OFF] or close Cateye Cycling™.
• The sensor must be paired with smart computer. Smart computer : Pairing with a sensor Are you using a Bluetooth Smart sensor? • Smart computer can only receive signals from Bluetooth Smart sensors. The sensor battery may be flat. • Replace the battery with a new one. Battery replacement : Optional sensors The magnet may not be in the correct position relative to the speed sensor or speed (cadence) sensor (ISC). • Refer to the sensor instruction manual and attach the sensor correctly.
Frequently Asked Questions Measurement does not work : Cannot measure heart rate Why isn't the [H] icon flashing? Have you paired the sensor? • The sensor must be paired with Cateye Cycling™ or with smart computer. When measuring in Mirror Mode When measuring in Sensor Direct Mode or using smart computer by itself The electrode pad may have slipped out of position. • Check that the electrode pad is still in close contact with your body. Your skin may be dry. • Wet the electrode pad a little.
Frequently Asked Questions Measurement does not work : Cannot measure power Why isn't the [P] icon flashing? Have you paired the sensor? • The sensor must be paired with Cateye Cycling™ or with smart computer. When measuring in Mirror Mode When measuring in Sensor Direct Mode or using smart computer by itself The power sensor may not be attached correctly. • Refer to the power sensor instruction manual and attach the power sensor correctly.
Connecting smartphone and smart computer Smartphone 1. Launch Cateye Cycling™, and from (MENU) turn on [Connect]. Smart computer 2. On the measurement screen, press MODE for 1 second to display the smartphone search screen and connect with your smartphone. When smart computer connects to a smartphone, it switches to the measurement standby display.
Pairing Important • Pairing (sensor ID synchronization) must be performed in order to use smart computer and sensors. • Do not pair sensors at a race venue or in similar locations where there are a lot of other users. Doing so may cause smart computer to be paired with another device. Smartphone 1. From (MENU) at the top left of the screen, turn on [Connect], and then tap [Device]. Tap [Device Pairing] to start pairing.
Smart computer When the smartphone switches to the Trip screen, smart computer switches from the smartphone search screen to the [ready] (measurement standby) display. Smartphone search screen Measurement standby Smart computer pairing is now complete. * If you have other sensors, continue pairing them. Pairing with a sensor Smart computer can be used with sensors compatible with Bluetooth 4.0. Pair it with optional accessories or commercial sensors as required.
Pairing (Sensor ID synchronization) Pair a sensor that you want to use with smart computer. Important • Pairing (sensor ID synchronization) must be performed in order to use a sensor. • Do not pair sensors at a race venue or in similar locations where there are many other users. Doing so may cause smart computer to be paired with another sensor. • Pair all sensors that you intend to use. 1. From the measurement screen, press MENU to switch to the menu screen.
• HR : Heart rate sensor • PW : Power sensor * When pairing a sensor with a smart computer, a "C" is displayed after the sensor name. Important When smart computer displays [FULL] on the screen and returns to the menu: Up to 9 separate sensor IDs can be paired with smart computer. If the maximum number of sensors have been paired, with the computer in pairing standby state, press MENU for 4 seconds to clear all pairings. * Pairing standby time is 5 minutes. Activate the sensor within this time. 4.
Tire circumference setting Set the tire circumference for a sensor capable of speed measurement. Important • Pairing (sensor ID synchronization) must be performed first. Pairing (Sensor ID synchronization) • Set tire circumference for each sensor. The default value is 2096 mm (700x23c). 1. From the measurement screen, press MENU to switch to the menu screen. Measurement screen Menu screen (Clock setting) * When the menu screen is left on for 1 minute, smart computer returns to the measurement screen.
Sensor selection (2 seconds) (2 seconds) Tire circumference value Increase numbers Move to next digit (2 seconds) * Sensors that can be selected are those that have been paired with Cateye Cycling™ or a smart computer. The letter that appears after the sensor name indicates how the sensor was paired. • A : Sensor paired with Cateye Cycling™ • C : Sensor paired with a smart computer * Error is displayed if values outside the setting range are entered. 4. Press MENU to confirm settings.
Mounting the speed (cadence) sensor (ISC-12) The speed (cadence) sensor can be mounted either on the top or bottom of the chain stay. Caution If the speed (cadence) sensor is mounted on the bottom of the chain stay rather than on the top, the adjustment range between the sensor and the magnet will be narrower.
Sensor screw Sensor arm (2) Attach the sensor rubber pad to the sensor. Sensor rubber pad (3) Refer to the illustration and temporarily attach the sensor to the left chain stay with nylon ties. left chain stay Nylon tie Caution Do not fully tighten the nylon ties. Once the nylon ties are fully tightened they cannot be removed. 2. Temporarily attach the magnet.
the speed sensor zone. * If the sensor cannot is not positioned so that both magnets (speed and cadence) pass through their respective sensor zones, reposition the sensor and the magnets so that each magnet passes through its sensor zone. 3. Adjust the gap between the sensor zone and the magnet. (1) Tilt the sensor so that the gap between the cadence magnet and the cadence sensor zone is approximately 3 mm, then fasten the sensor securely with nylon ties.
Wearing the heart rate sensor (HR-12) Heart rate measurement is performed by wearing a heart rate sensor around the chest. Before wearing the heart rate sensor Warning Never use this device if you use a pacemaker. • To eliminate measurement errors, it is recommended to moisten the electrode pads with water or apply electrolyte cream to the pads. • If you have sensitive skin, moisten the electrode pads with water and wear it over a thin shirt. • Chest hair may interfere with measurement in some cases.
* Ensure that the electrode pads are in close contact with your body. * If you have dry skin or are wearing the sensor over a shirt, measurement errors may result. In such cases, moisten the electrode pads with water.
Handling and Support Caution Smart computer / Optional sensors • Do not concentrate on smart computer or your smartphone while riding. Always ride safely. • Mount the bracket, sensor, and other components securely, and check them periodically to ensure that they are not loose. • Do not leave smart computer in direct sunlight for a long period of time. • Never disassemble smart computer. • Do not drop smart computer. Doing so may result in damage or personal injury.
1665150 Lithium battery (CR2032) Optional accessories The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by CATEYE Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners.
(When ISC-12 and HR-12 are paired and used for one hour a day.) • Strada Smart unit: Lithium battery (CR2032) x1 / Approximately 5 months (When ISC-12 and HR-12 are paired and used for one hour a day.) ! Optional sensors • Heart rate sensor (HR-12): Lithium battery (CR2032) x1 / Approximately 5 months (If used for 1 hour a day.) • Speed sensor (ISC-12): Lithium battery (CR2032) x1 / Approximately 5 months (If used for 1 hour a day.
2-year guarantee • Padrone Smart unit • Strada Smart unit • ISC-12 Speed/cadence sensor • HR-12 Heart rate sensor (Accessories and battery consumption excluded) CatEye cycle computers are warranted to be free of defects from materials and workmanship for a period of two years from original purchase. If the product fails to work due to normal use, CatEye will repair or replace the defect at no charge. Service must be performed by CatEye or an authorized retailer.
Legal Notices Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
