Operation Manual

5
How to install the
unit on your bicycle
Setting up the
computer
How to use the
computer
Setup of your PC
Uploading the
measurement data
Changing the
computer
configuration
OthersIntroduction
Icon Description
Pace arrow
Indicates if the current speed is faster or slower than the average speed.
( Faster, Slower)
GPS signal received icon
Indicates the GPS signal receiving status
(Light up) GPS signal is strong
GPS signal is weak
GPS signal not received icon
Flashes when GPS signal cannot be received. In such status, measurement
cannot be performed.
* When such status lasts for 10 minutes, the computer turns off the power
automatically. (Auto power off)
Speed unit
Flashes during measurement.
Speed sensor icon
Indicates the speed sensor or speed/cadence (ISC) sensor being received.
* Except for speed signal from power sensor.
Power unit
Tire circumference icon
Lights up when the tire circumference is entered.
Clock icon
Lights up when the clock is displayed.
Daylight saving time icon
* For information on how to set the daylight saving time, see “Clock setting”
(when using CATEYE Sync™: page 30, when using the computer alone:
page 33).
Screen display
Icon Description
Battery icon
Displays the remaining battery capacity in 5 levels.
* For information on how to charge the battery, see “How to turn on/off the
power / how to charge the battery” (page 7).
(Light up) Remaining battery capacity is large
Remaining battery capacity is small
(Flash)
Remaining battery capacity is nearly zero. In such case, the
computer turns off the power automatically.
Charge the battery as soon as possible.
Sensor signal icon
Flashes when the ANT+ sensor signal is received.
S (Flash) *1 When the speed signal is received
C (Flash) *1 When the cadence signal is received
H (Flash) When the heart rate signal is received
P (Flash) When the power signal is received
*1 : When the signal from the speed/cadence (ISC) sensor is received, S and
C flash simultaneously.
Current speed
0.0 (3.0) – 105.9 km/h
[0.0 (2.0) – 65.9 m/h]
Selected data icon
Indicates the data displayed
on the lower display.
Dot display
Displays the clock or altitude.
* To change the display, see “Setting the middle display” (when using CATEYE
Sync™: page 30, when using the computer alone: page 39).
* Displays the power (wattage) when the power signal is received.