Operation Manual

40
Introduction
How to install the
unit on your bicycle
Setting up the
computer
How to use the
computer
Setup of your PC
Uploading the
measurement data
Changing the
computer
configuration
Others
When the operation is unstable
When the computer displays incorrectly, perform the restarting operation to stabilize the
operation.
* Performing the restarting operation deletes any records under measurement.
* We recommend that you perform the resetting operation to generate the trip data, before
performing the restarting operation.
Restarting operation
Press the AC button on the back of the computer. All screen items
will light up for 2 seconds, and the unit will change to the GPS
search screen.
ACAC
Data to be stored / data to be deleted
Data to be stored / deleted upon the restarting operation are as follows.
Data to be stored Data to be deleted
Speed unit
Data under measurement
(elapsed time, trip distance, trip
distance-2, average speed, maximum
speed, and GPS route information)
Clock setting (time zone, previous time zone,
daylight saving time, and display format)
Sensor ID of each sensor (speed, speed/cadence,
cadence, heart rate, power)
Night-time setting
(start time and end time)
Record interval
Function display
Middle display
Total distance (*1)
Trip data generated upon the resetting operation
*1 Once you perform the restarting operation before the resetting operation after measure-
ment, the distance is not added to the total distance.
GPS search screen