Operation Manual

39
Introduction
How to install the
unit on your bicycle
Setting up the
computer
How to use the
computer
Setup of your PC
Uploading the
measurement data
Changing the
computer
configuration
Others
Selecting the speed unit
Select the speed unit (km/h or m/h).
MODE
km/h
↔
m/h
MODE
MENU
(Press & hold)
Changing
the settings
Entering the total distance
You can enter the start value of the total distance, and add the trip dis-
tance to it. Use this function when you renew and/or reset your unit.
* Enter the total distance in integer number only.
MODE
Increase the value
MODE
Move digits
(Press & hold)
MODE
MENU
(00000 — 99999)
(Press
& hold)
(Press
& hold)
Changing
the settings
Changing
the settings
Frome “Setting function display” (page 38)
MODE
MENU
Setting the middle display
Select the middle display of the measurement screen.
* When the power signal is received, the middle display shows
power regardless of the middle display setting.
MODE
CLK (Clock)
↔
ALT (Altitude)
MODE
MODE
MODE
From “Entering the total distance”
To “Clock setting” (page 33)
Register
the setting
To “Selecting the speed unit”
Register
the setting
Register
the setting