Operation Manual

33
Introduction
How to install the
unit on your bicycle
Setting up the
computer
How to use the
computer
Setup of your PC
Uploading the
measurement data
Others
Changing the
computer
configuration
Changing the settings of the computer alone
Pressing the MENU button with the measurement screen displayed changes to the menu
screen. Various settings can be changed on the menu screen.
* After you change the setting, be sure to press the MENU button to register it.
* Leaving the menu screen without any operation for 1 minute returns to the measurement
screen.
Time zone list
Select the code for the city nearest from
your current location.
MODE
Switch the display
* For details, see “Time zone list” (page 34).
Daylight saving time
Select whether to use the daylight saving
time.
ON Moves the clock 1 hour ahead
OFF Displays in regular clock
MODE
ON
↔
OFF
Clock setting
Change the settings of the time zone, daylight saving time, and the
clock display format.
* With this unit, it is not necessary to set the clock/date, since they
are synchronized after receiving GPS signal.
Clock display format
Select the display format of “12h” (12
hours display) or “24h” (24 hours display).
MODE
12h
↔
24h
MODE
MODE
MODE
MODE
MENU
MODE
MENU
MODE
Clock setting
(on the right of
this page)
Measurement
screen
From “Selecting the speed unit” (page 39)
To “Setting the tire circumference” (page 35)
(Press & hold)
(Press
& hold)
Menu top screen
(Press
& hold)
Register
the setting
Changing
the settings
(Press & hold)
Setting the tire
circumference
(page 35)
Pairing the sensor
(page 36)
Setting the record
interval
(page 38)
Setting function display
(page 38)
Setting the middle
display
(page 39)
Entering the total
distance
(page 39)
Selecting the
speed unit
(page 39)
Press & hold
for 4 sec.
Night-time
setting
(page 38)
Changing the time zone (shortcut)
When you travel back and forth between two regions, you can
easily return the time zone to the original one.
* For details, see “Time zone list” (page 34)