Operation Manual

32
Introduction
How to install the
unit on your bicycle
Setting up the
computer
How to use the
computer
Setup of your PC
Uploading the
measurement data
Others
Changing the
computer
configuration
Setting items Description
Sampling
interval
Set the record interval of the measurement data.
* The maximum recording time (total time of all trip data) and the
maximum time for one trip depend on the interval selected.
• 1s (at intervals of 1 second) : 35 hours / 12 hours
• 2s (at intervals of 2 seconds) : 70 hours / 24 hours
• 5s (at intervals of 5 seconds) : 175 hours / 60 hours
Clock display
format
Select the display format of “12h” (12 hours display) or “24h” (24
hours display).
* Date and clock are acquired from GPS signal; therefore, it is not
necessary to enter them.
Function
display
You can hide undesired functions.
(Check mark: function displayed, No check mark: function hidden)
* Measurement is performed for hidden functions. When a hidden
function is displayed again, its measurement results will be reflected.
Middle
display
Select the middle display of the measurement screen.
• Clock : Displays the clock.
• Altitude : Displays altitude.
* When the power signal is received, the middle display shows power
regardless of the middle display setting.
7
Click on [Apply]
The changes are reflected to the computer.
Remove the computer from the cradle. Now, changing the computer configuration is
completed.
Delete the data recorded
in the computer.
Read the current settings
of the computer.