Operation Manual

15
Introduction
How to install the
unit on your bicycle
Setting up the
computer
Setup of your PC
Uploading the
measurement data
Changing the
computer
configuration
Others
How to use the
computer
Standby screen
When the unit is on the measurement screen, if there is no bicycle movement or button
operation for 10 minutes while the GPS signal or the speed signal is being received, the
unit automatically switches to the standby screen. Riding again returns to the measurement
screen.
* The unit turns off the power automatically in 50 minutes with the standby screen dis-
played. (Auto power off)
* When the GPS signal cannot be received with the standby screen displayed, the GPS sig-
nal not received icon (
) flashes. When the speed signal cannot be received, even riding
again does not return to the measurement screen.
Measure-
ment screen
Power OFF
Speed unit
Changed automatically
Changed by operating
buttons
GPS signal
To be changed according to the
GPS signal receiving status.
Speed signal
S
MODE
GPS search screen
GPS signal or
speed signal
received
Switches to measurement
screen when GPS signal
and/or speed signal can-
not be received
* STOP is displayed when
GPS is not received.
Clock
0:00 – 23:59
[AM1:00 – PM12:59]
(Press & hold)
Power
ON/OFF
Standby screen
MODE
No operation
for 10 minutes
No operation
for 10 minutes
or
No opera-
tion for 50
minutes
Measurement
starts
Measurement
stops
GO
STOP
* When GPS signal or speed signal is not received,
measurement will not start even if the button is
pressed and GO is displayed.
Current speed
0.0 (3.0) – 105.9 km/h
[0.0 (2.0) – 65.9 m/h]
Selected data
Press &
release