Operation Manual

11
Introduction
How to install the
unit on your bicycle
Setting up the
computer
Others
Changing the
computer con-
figuration
Uploading the mea-
surement data
Setup of your
PC
How to use the
computer
Backlight
When using it during night-time, the backlight always lights up.
Example: Setting of the night-time: 7:00 PM to 6:00 AM
* The night-time can be set to your needs.
For details, see “Night-time setting” (when using CATEYE Sync™: page 23, when using
the computer alone: page 27).
* As default, it is set to 6:00 PM to 7:00 AM.
Switching computer function
Pressing the MODE button switches the measurement data in the lower display, in the order
shown in the figure.
* Unnecessary functions can be hidden. For details, see “Setting function display” (when
using CATEYE Sync™: page 23, when using the computer alone: page 27).
* When altitude is displayed in the
middle display, clock is displayed.
*1: When Tm exceeds about 27
hours, or Dst exceeds 999.99
km, Average Speed cannot be
measured, while displaying “.E”.
Reset the data.
MODE MODE
MODE MODE
MODE
MODE
MODE
Odo
Total Distance
0.0 – 9999.9 /
10000 – 99999 km [mile]
PM 6:59 AM 6:00PM 7:00 – AM 5:59
A backlight is turned on automatically
Tm
Elapsed Time
0:00’ 00” – 9:59’ 59”
Dst
Trip Distance
0.00 – 999.99 km [mile]
Dst 2
Trip Distance-2
0.00 – 999.99 /
1000.0 – 9999.9 km [mile]
Av
Average Speed
0.0 – 105.9 km/h
[0.0 – 65.9 m/h]
Mx
Maximum Speed
0.0 – 105.9 km/h
[0.0 – 65.9 m/h]
ALT
Altitude
-500 – 9999 m
[-1640 – 29600 ft]