Operation Manual

4
Introduction
Setting up the
computer
How to use the
computer
Others
Changing the
computer con-
figuration
Uploading the mea-
surement data
Setup of your
PC
How to install the
unit on your bicycle
Watch video
(YouTube)
How to install the unit on your bicycle
Attach the bracket to the stem or handlebar
The FlexTight™ bracket can be attached to either the stem or the handlebar, depending on
how the bracket fits into the bracket band.
Caution: Be sure to tighten the dial of the FlexTight™ bracket by hand.
Tightening it strongly using a tool, etc. may damage the screw thread.
When attaching the FlexTight™ bracket to the stem
When attaching the FlexTight™ bracket to the handlebar
* To receive GPS signal effectively, adjust the direction of the bracket so that the computer
display faces to the sky.
Cut the excess length of the band using scissors.
Caution: Round off the cut edge of the bracket strap to prevent
injury.
* To mount the bracket to an aero-shaped handlebar or larger stem, use the optional nylon
ties bracket.
Remove/Install the computer
Caution: When removing, hold the unit to prevent it from falling.
Click the button, then a browser will open and a
video will be played back.
Bracket band
Bracket band
Stem
Click
Handlebar
Dial
Dial
Bracket
rubber pad
Bracket
rubber pad
Bracket
Bracket