User manual

8
GETTING STARTED
INSTALLING A NANO SIM CARD
1. Place your device on a at surface with the display facing upwards and open the SIM protective cover.
2. Use your ngertip to pull out the SIM tray.
3. Put the Nano SIM card in the SIM tray as indicated on the tray guide with gold pins facing upwards.
4. Insert the SIM tray back into the SIM card slot and ensure the SIM protective cover is completely closed.
INSTALLING A MEMORY CARD
1. Place your device on a at surface with the display facing upwards and open the SD protective cover.
2. Insert a microSD™ card into the memory card slot with gold pins facing upwards (the white device ID label preinstalled
in this space remains. Place the microSD™ card on top of the white label.)
NOTE:
• Push the memory card until you hear a locking sound.
• To remove the microSD card, open the SD protective cover, press against the edge of the memory card and remove it.
• Do not force the microSD card as this could damage the memory card or slot.
• Installation of a memory card is optional.
CHARGING THE BATTERY
The S48c batery cannot be removed from the device. Charge the battery to 100% before using your device for the rst time.
1. Connect the USB power cable to the charging power adapter.
2. Open the USB port cover and insert the USB power cable to the USB port.
NOTE:
• Only use Cat approved chargers and cables. Unapproved equipment may cause damage to the device or cause batteries
to become a re hazard.