User`s manual

90
A2DP/ AVRCP Services
A2DP/ AVRCP are used for connecting to high-quality stereo headsets.
The stereo headset applicable to hands-free service will be connected to the hands-free service after being connected
to A3DP service.
1
1
2
2
3
3
4
5
Activate Bluetooth on the both device and set the Bluetooth device into detection and connection mode.
Tap Add a Device after choosing Start > Settings > Connections > Bluetooth. CW30 will begin to search for a
new Bluetooth device within range.
Check the distance between two devices is within 10 m (30 ft).
Select the stereo headset in the list. Tapping Next will take you to a password window. For more details, refer to
the user
’
s manual of the device.
Tap Add a Device after selecting Start > Settings > Connections > Bluetooth. CW30 will start to search for a new
Bluetooth device within the range.
Tap Connection. CW30 will be paired with the stereo headset.
Select the stereo headset from the list and tap Next. A screen asking a password will appear. For further
information, refer to user
’
s manual of the device.
Tapping Connection will pair CW30 with the stereo headset.
 If smart synchronization is pre-con¿gured and a pre-de¿ned PIN is requested, the password screen will
not appear.
$BVUJPO
 If smart synchronization is pre-con¿gured and a pre-de¿ned PIN is requested, that password screen will
not appear.
$BVUJPO