User`s manual

86
Available Services
For the information on available services, refer to the next paragraph.
1
2
3
4
5
6
7
Activate Bluetooth in both devices and turn on detection mode.
Check the distance between the devices is within 10 m (30 ft).
Tap Start > Settings > Connections > Bluetooth icon.
Tap New Device. CW30 will begin to search for a Bluetooth device within the range.
Enter the name of the headset, and tap Next. A password window will appear.
Enter a password for the headset.
Tap Next. CW30 will be connected to the headset. For the instructions on the communications with Bluetooth
devices, refer to the user
’
s manual of the headset.
11
12
Choose the service you want and tap OK. If you don
’
t select the service, it will not be synchronized even if the
device is synchronized. If you don
’
t choose a service, a message that keeps asking you to enter a password will
appear.
The device will appear in the list of the main panel. When the both devices accept their passwords, a reliable
(synchronized) partnership is established.
 Some devices
may not require PIN depending on the certi¿cation of devices.
$BVUJPO
 The partnership with a Bluetooth headset is different from each headset, and the device only remembers
the last connected headset. If a problem occurs while making a connection to a headset, switch the
headset to detection mode. For more details, refer to user
’
s manual of the headset. Only WAN audio
will be transmitted to a headset. System audio will keep being transmitted to CW30 speaker. You can
answer or make a call using a hands-free pro¿le.
$BVUJPO