User`s manual

22
MicroSD(Micro Secure Digital) card
Adjusting the hand strap
The MicroSD card slot provides an additional saving device function. This slot is located at the bottom of the battery
mounting part.
Removing MicroSD is in the reverse order.
[Installing MicroSD]
Adjust the hand strap for the convenient use of the device for a long period of time.
1
2
3
Connect the hand strap to the end of the device beneath the battery cover.
Adjust the length of the hand strap by passing the Velcro through the hole.
Press both sides of the strap together to get ¿xed.
Removing the screen protection cover
The screen protective cover is installed at factory before shipment in order to minimize abrasion that may occur during
shipment.
Remove the screen protective cover before use. After removing it, attach protective ¿lm to the screen immediately.
 To prevent MicroSD from damages is careful about static electricity or other damages. It is
recommended to follow the appropriate ESD preventive measures for static electricity.
8BSOJOH