User's Manual

27
Catchbox Lite
1. Plug the included Power supply to AC mains outlet and connect it to the USB-C socket located on
the rear of the Transmitter.
2. LEDs on the front of the Transmitter will light up indicating the state of charge of the battery.
Blinking will indicate the charging process is ongoing.
3. When all LEDs are lit the battery is fully charged.
Charging the Transmitter with USB cable
Always use the included Power supply to charge the Transmitter. Other devices
may provide insufficient amount of power which will result in long charging time.
Note: Do not use for charging the included USB data cable with a computer as it
may provide insufficient amount of power and will result in a long charging time.