User's Manual

Catchbox Lite

Setting up the Receiver

Turning on the Receiver

Connect the two antennas to the receiver unit by

screwing them clockwise into the antenna ports

located at the back. After the antennas have been

connected, position them in a V shape to maximise

their eﬀectiveness.

1. Make sure that Receiver is properly powered.

2. Turn on the Receiver by slippingthe switch on

the front panel of the device.

3. LED on the front panel will light up indicating the

device is on.

Adjusting the volume

To adjust the volume, simply turn the volume knob

located on the front of the receiver unit.

Clockwise rotation increases volume while

anti-clockwisereduces it.

90°

The use of other antennas than those provided by the manufacturer is strictly

prohibited.

Avoid excessive volume. Do not exceed 70dBa for airborne noise. Before

turning on the device make sure the volume knob is turned to zero (fully

counterclockwise), to ensure that no unexpected loud noises appear when the

device is turned on.

!WARNING!

!CAUTION!