SDS

ManualsBrandsCAT ManualsCell Phones & AccessoriesS62 Pro Smartphone - 4G Rugged Phone with 2.0 GHz Octo Core Processor

APACK TECHNOLOGY CO., LTD.

File No./Rev.: SDS Date:2020 / 4/ 8

Material Safety Data Sheet

Section 1 Chemical Product and Company Identification

Product information battery Model : APP00317

Lithium-Ion Rechargeable cell Model: LiFun 586071

Nominal Voltage:3.8V

Watt-hour Rating:15.2Wh

Manufacturer: APACK.TECHNOLOGY CO., LTD.

Address: 3F, No. 649-2, Jhongjheng Rd., Sinjhuang Dist, New Taipei City 242,Taiwan

Telephone: +886-2-2903-1303

Section 2 Hazards Identification

The lithium ion batteries are not hazardous used according to the instructions of manufacturer

under normal conditions. In case of abuse, there’s a risk of explode, rupture, fire, heat, leakage of

internal components, which could cause casualty loss. Abuses include but not limited to the

following cases: charge for a long time, short circuit, put into fire, whack with hard object,

puncture with acute object, crush, break.

Section 3 Composition/Information on Ingredients

INGREDIENTS

Molecular Formula /% (about)

CAS No.

Cobaltic lithium oxide

35.05%

12190-79-3

Graphite powder

15.98%

7782-42-5

Carbon black

0.79%

1333-86-4

Hexafluoropropylene-vinylidene

fluoride copolymer

9.87%

9011-17-0

Dimethyl carbonate

4.38%

616-38-6

Carbonate, methyl ethyl

2.29%

623-53-0

Phosphate(1-), hexafluoro-, lithium

2.95%

21324-40-3

Ethylene carbonate (EC)

6.34%

96-49-1

Diethyl carbonate (DEC)

2.76%

105-58-8

Propylene carbonate (PC)

1.11%

108-32-7

Copper

8.39%

7440-50-8

Rubber, butadiene styrene (SBR)

0.71%

61789-96-6

Aluminum

9.38%

7429-90-5

Summary of content (6 pages)

PAGE 1
APACK TECHNOLOGY CO., LTD. Material Safety Data Sheet Section 1 Chemical Product and Company Identification Product information battery Model : APP00317 Lithium-Ion Rechargeable cell Model: LiFun 586071 Nominal Voltage:3.8V Watt-hour Rating:15.2Wh Manufacturer: APACK.TECHNOLOGY CO., LTD. Address: 3F, No. 649-2, Jhongjheng Rd.
PAGE 2
APACK TECHNOLOGY CO., LTD. Section 4 First-aid Measures The lithium batteries are not hazardous with eye and skin contact under normal circumstance. In case of fire or rupture, the leakage of internal hazardous substance and formation of hazardous substance would occur, take the following measures if contact with it: Eye : Check for and remove any contact lenses.
PAGE 3
APACK TECHNOLOGY CO., LTD. There is no need aspect,ventilationequipment for should protect under beinstalled. Gas normal mask, conditions.Inengineering blinkers,glovesenduring chemicalerosion anexposure suit are required when dealing with fire and leakage. Section 9 Physical and Chemical Properties Batteries are not single chemical material; there are no specific physical and chemical properties such as melting point and boiling point.
PAGE 4
APACK TECHNOLOGY CO., LTD. Section 13 Disposal Deserted batteries couldn’t be treated as ordinary trash. Be put to garbage box which recycle batteries after being placed into plastic bags or bedealt as special trash. Couldn’t be thrown into fire or placed in high temperature. Couldn’t be dissected, pierced, crushed or treated similarly. The package and plastic box which contain batteries could be treated as ordinary trash. Best way is recycling.
PAGE 5
APACK TECHNOLOGY CO., LTD. 3. For transported by air, Lithium-ion Cells/Batteries shipped as “Not Restricted” Cargo: Must comply with section II of PI965-PI967 accordingly; For cells, the Watt-hour rating should not be more than 20Wh; For batteries, the Watt-hour rating should not be more than 100Wh. Watt-hour rating must be marked on the outside of the battery case (marked by manufacturer), 4. Each consignment must be accompanied with a document such as an air waybill with anindication.
PAGE 6
APACK TECHNOLOGY CO., LTD. information contained. Apack doesn’t assume responsibility for any damage or loss because of misuse of batteries. Users should grasp the correct use method and be responsible for the use of batteries. File No./Rev.