Instructions

9
Be careful not to use excessive force when plugging the USB cable. Any damage caused by attempting to insert the
connector incorrectly is not covered by the warranty.
3. Connect the USB to the charging power adapter and plug into an AC mains socket.
4. When charging is complete remove the USB cable from the device, before unplugging the power adapter from the mains
socket. Close the USB port cover on the device.
IMPORTANT INFORMATION REGARDING FUTURE USE OF
BATTERY
If the battery is completely exhausted, your device may not power on immediately after charging starts. Allow the battery
to charge for a few minutes before attempting to turn on the phone. The on-screen charge animation may not be displayed
during this period.
The time required to charge the battery depends on the environmental temperature and age of the battery.
When the battery power level is low, the device plays an alert and displays a prompt. When the battery power is almost
exhausted, your phone will power off automatically.
POWERING YOUR DEVICE ON/OFF
POWER ON
• Press and hold the Power key.
The rst time you turn on your phone, you will see a Welcome Screen. Select your preferred language and tap START to
continue the set-up.
NOTE:
• A Wi-Fi or Data connection is required.
• If personal identication number (PIN) protection is enabled on your SIM Card, you will be asked to enter your PIN
before the Welcome Screen.
• A Google account is required to use some of the Google services on your device. You will be asked to sign in with your
existing Google account, or set up a new account later.
POWERING OFF
1. Press and hold the Power key to open the Power Off options menu.
2. Tap Power off.