Instructions
8
GETTING STARTED
INSTALLING A NANO SIM AND MEMORY CARD
1. Place your device on a at surface with the display facing downwards.
2. Use your ngertip to pull out the SIM/SD door.
3. Place the Nano SIM onto the SIM tray with the gold pins facing upwards.
4. Carefully insert the SIM tray back into the SIM card slot.
NOTE:
• The SIM tray is attached to the side door.
• Push the SIM/SD door back in until it is xed securely.
Some devices take two SIM cards.
When two SIM cards are inserted, both SIM card slots can support 4G/3G service.
Conguration of SIM 1: 4G / 3G / 2G
Conguration of SIM 2: 4G / 3G / 2G
If your device takes one SIM card only, the second slot will be used for a memory card.
Follow the steps to insert your memory card.
1. Place your device on a at surface with the display facing downwards.
2. Use your ngertip to pull out the SIM/SD door.
3. Carefully pull out the memory tray and place on it a microSD card with gold pins facing upwards.
4. Carefully insert the memory card tray into the memory card slot.
5. Carefully insert the SIM tray into the SIM card slot. Then push the SIM/SD door inward until it is securely xed.
NOTE:
• Do not force the microSD card as this could cause damage.
CHARGING THE BATTERY
The S61 battery cannot be removed from the device. To charge it:
1. Connect the USB cable to the charging power adapter.
Use only Cat® approved chargers and cables. Unapproved equipment may cause damage to the device or cause
batteries to explode and will void the warranty.
2. Open the USB port cover and connect the USB cable to the USB port.