Instructions
33
CALCULATOR
The Cat S61 is equipped with a calculator that has both a standard and advanced mode.
OPENING THE CALCULATOR
1. Tap > Calculator to open the app.
2. Swipe left or rotate the device to horizontal to access the Advanced calculator mode.
MANAGING THE DEVICE
To congure your device, tap > Settings .
SETTING THE DATE AND TIME
When you rst turn on your device, there is an option to update the time and date automatically, using the time provided by
your network.
NOTE:
You cannot set the date, time and time zone manually if using the automatic option.
If you wish to set the date and time settings manually, do the following:
1. On the Settings screen, tap System > Date & time.
2. Slide the Automatic date & time or Automatic time zone switches to the left to disable the functions.
3. Tap Set date, then select the desired date and tap OK.
4. Tap Set time. On the set time screen, tap the hour or minute eld and move the pointer up or down to set the time. Tap
OK when the conguration is complete.
5. Tap Select time zone, and then select the desired time zone from the list.
6. Enable or disable the Use 24-hour format function to switch between 24-hour and 12-hour formats.
CONFIGURING THE PROGRAMMABLE KEY
1. You can assign the Programmable key to perform various functions, in some circumstances while the screen is locked.
2. On the Settings screen, tap Programmable key.
3. Select the button pressing method. Then select an available function to assign to the key.
4. Tap OK.
PERSONALISING THE DISPLAY
ADJUSTING THE SCREEN BRIGHTNESS
1. On the Settings screen, tap Display > Brightness level.
2. Drag the slider left to make the screen darker, or right to make it brighter.
3. Lift your nger off the slider to save your settings automatically.
Tip: Slide the Adaptive Brightness switch to the right to enable the device to automatically adjust the brightness of
the screen depending on the light level around you.
AUTO-ROTATE SCREEN
To enable the display to rotate when you turn your device between landscape and portrait, tap Advanced and slide the
Auto-rotate switch to the right .