Instructions

23
3. Aim the red laser at the back of the device at the surface you wish to measure.
4. Wait for the app to detect the location of the laser dot, indicated by the green square, or tap the location of the laser
dot on the screen.
NOTE:
Do not aim laser on a shiny, very bright or transparent target, such as a light-source, glossy metal, glass, etc. otherwise it
may cause an inaccurate measurement.
• To adjust the measurement related settings, tap .
• To adjust the exposure, tap the icon and move the slider up (to increase) or down (to decrease).
5. Tap to measure the distance.
• Once the laser dot is located in the green square, tap .
• You can ne-tune the alignment of the green crosshair over the centre of the laser dot by dragging the image up, down,
left or right.
• The distance will now appear in the top left corner of the screen.
• You can save this image, or exit using the icons on the right of the screen.
NOTE:
Images will not automatically save, unless you turn on Auto Save in Settings.
Re-measure gallery
Capture button
Exposure adjustment
Settings
Distance value