Instructions

22
VIEWING YOUR RECORDED PHOTOS OR VIDEOS
Open the latest captured photo or video by tapping the thumbnail image in the bottom right hand corner of the screen.
1. Tap to switch to the Library view.
2. Swipe left/right to view the previous/next le.
3. Tap to play a video.
4. Tap to edit a photo. Then tap to change the Spot Meter mode; tap to choose between Infrared with MSX
and Visual video, or tap to change colour palette. When complete, tap to save changes.
5. Tap to share the selected le via various apps available on your device.
6. Tap to delete the selected le. Tap OK to conrm deletion.
7. Tap to view information about the recorded le, including the date, time, colour pallet, temperature, emissivity and
location.
8. Tap to launch FLIR Tools, which can also be used to view and edit images.
TUNING
The camera has a mechanical shutter inside that periodically activates and allows the thermal camera to do a calibration or
image refresh. When the shutter activates, the image will freeze for a brief period.
The purpose of the shutter is to allow the camera to provide an improved image. The Cat S61 performs the tuning operation
automatically on a periodic basis. Note that when the Spot Meter is turned on, the tuning will occur more often.
MEASURING TEMPERATURE WITH SPOT METERS
Use the Spot Meter to measure surface temperatures, either on a saved thermal image or from the live thermal camera feed.
1. Tap , and then again from the submenu that appears below.
2. A Spot Meter appears on the display, with a temperature reading.
3. Tap and drag the Spot Meter to another point. You can add up to three Spot Meters.
4. Tap and hold over a Spot Meter to delete it.
FROM A PREVIOUS IMAGE:
1. Tap the MyFLIR Gallery , then tap the edit icon.
2. Tap the Spot Meter icon, and again from the sub menu.
3. A Spot Meter appears on the display, tap and drag it to your chosen position.
4. You can add up to three Spot Meters. Tap and hold over a Spot Meter to delete it.
NOTE:
To switch between Celsius and Fahrenheit in the live thermal camera feed, select Menu > Settings, then slide the
Temperature Unit switch.
CHANGING COLOUR PALETTES
You can select from a range of visualisations for different temperatures by selecting the colour palette icon , and choosing
from nine colour schemes.
USING LASER-ASSISTED MEASUREMENT
The Cat S61 is equipped with a laser-assisted distance and area measurement system.
TAKING A DISTANCE MEASUREMENT
1. Tap > Measure to launch the app
2. Hold the device horizontally and level, it needs to be parallel to the surface you are measuring for accurate results.