SDS

THE COPYRIGHT BELONGS TO TINNO MOBILE TECHNOLOGY CORP.
2019-11-18
All Rights Reserved
Page 4 of 41 Pages
一、 Technical specifications 技术规格部分
1
、
Scope of application
适用范围
This specification describes battery’s nominal parameters, electrical characteristics,
safety performance, environmental adaptability, test and test criteria, instructions for
use and safety procedures, quality assessment and packaging, marking, storage,
transportation, etc. This file is for battery produced by Dongguan yongwei technology
co., LTD containing VEKEN 596266PU cell.
本规格书描述电池之标称参数、电气特性、安全性能、环境适应性及其实验和判定、使用说
明和安全规程、质量评定及包装、标志、贮存、运输等。适用于采用维科 596266PU 电芯, 东
莞市甬维科技有限公司制成的配套电池。
2
、
Battery specification
电池规格
Items 内 容
Specification 参 数
Note 备 注
1
Nominal voltage
标称电压
3.85V
2
Nominal capacity
标称容量
4100mAh
The capacity of fully-charged
battery discharges at 0.2C to
cut-off voltage.
完全充电后用 0.2C 放电至截止
电压的容量。
3
Capacity of 4.35 V
4.35V 容量
4100mAh
CC-CVcharge to 4.35v,
cut-off current 0.02c,
discharge to cut-off voltage
with 0.2c current
CC-CV 充电充到 4.35V，截止电
流 0.02C，用 0.2C 放电至截止
电压的容量
4
3.4V discharge time
3.4V 放电时间
≥270min
The time that the
fully-charged battery need to
discharge to 3.4V at 0.2C.
完全充电后用 0.2C 放电至 3.4V
的时间。
5
Charging voltage
充电电压
4.4V
6
Internal resistance
内 阻
110 mΩ（Max）
SOC50% 半电态
7
Charging way
充电方式
C.C/C.V.
恒流/恒压方式
Constant current/voltage
depends on battery voltage
恒流/恒压