User manual

9
NOTE:
Be careful not to use excessive force when connecting the USB cable and be aware of the correct orientation of the
plug.
Attempting to insert the connector incorrectly may cause damage that will not be covered by the warranty.
3. Plug the charger into the appropriate AC mains socket.
4. When the green light shows on the indication LED, your device is fully charged. Firstly, unplug the USB cable from the
device, then unplug the charger from the mains socket.
BATTERY SHARE
The Cat S41 features a very large 5000 mAh battery, big enough to give you up to 44 days 3G standby time or up to 38 hours
3G talk time. It can also charge other devices and accessories with its Battery Share feature.
By using the provided USB Battery Share cable, your device can transform into a power bank. You can charge another device
and choose the battery level you wish to reserve for yourself via the easy-to-use, in-app slider control.
NOTE:
If you plug in the Battery Share cable, or open the Battery Share app when your device has less than 20% battery, a pop
up message will appear saying ‘Battery level too low to use Battery Share controls.’ Select OK, to charge the device
without setting a share limit.
When the device you’re charging is fully charged, or when your pre-set minimum battery level is reached, it will simply stop
charging - meaning you can get on with your day, no supervision required.
IMPORTANT INFORMATION REGARDING FUTURE USE OF
BATTERY
If the battery is completely exhausted, your device may not power on immediately after charging starts. Before attempting
to turn it on, allow the battery to charge for a few minutes. The on-screen charge animation may not be displayed during
this period.
When the battery power level is low, your device plays an alert and displays a prompt and a red light appears in the LED
indicator. When the battery power is almost exhausted, your device will power off automatically.
Note: The time required to charge the battery depends on the environmental temperature and the age of the battery.
POWERING YOUR DEVICE ON/OFF
POWER ON
1. Press the Power key .
When you turn on your device for the rst time, a Welcome Screen will be displayed. Firstly, select your preferred language
and then tap GET STARTED to continue with the set-up process.