User manual

8
GETTING STARTED
INSTALLING A NANO SIM CARD
1. Place your device on at surface with the display facing downwards. Then open the side door.
2. Use your ngertip to pull out the SIM tray.
3. Put the Nano SIM card in the SIM tray as indicated on the tray guide with gold pins facing upwards.
4. Insert the SIM tray back into the SIM card slot.
NOTE:
• Ensure the SIM card is xed securely in the SIM tray.
• Push the SIM tray until it is fully inserted in the slot.
• To remove the Nano SIM card, use your ngertip to pull the tray out. Then remove the Nano SIM card.
INSTALLING A MEMORY CARD
1. Place your device on a at surface with the display facing down. Then open the side door.
2. Insert a microSD card into the memory card slot with gold pins facing upwards.
NOTE:
• Push the memory card until you hear a locking sound.
• To remove the microSD card, press against the edge of the memory card and release it.
• Do not force the microSD card as this could damage the memory card or slot.
CHARGING THE BATTERY
Charge the battery before using your device for the rst time.
1. Connect the USB power cable to the charging power adapter.
NOTE:
• Only use Cat approved chargers and cables. Unapproved equipment may cause damage to the device or cause batteries
to explode.
2. Open the USB port cover and then connect the USB power cable to the USB port.