User Manual
Table Of Contents
- WARNINGS
- TECHNICAL SPECIFICATIONS
- MACHINE COMPONENTS
- MACHINE SET UP
- Operation Instructions
- MACHINE STORAGE
- MAINTENANCE
- Motors should be checked every 250 hours. Turn the brush on and off to ensure the motor is working properly.
- BATTERY MAINTENANCE
- Replacing Roller Brushes
- Replacing Side Brushes
- Replacing Filters
- TROUBLESHOOTING
- GLOBAL EQUIPMENT COMPANY INC.
- FLOOR CARE EQUIPMENT WARRANTY
C49R Model 641748
7
Operation Instructions
1. User must remain seated during operation.
2. Turn the key of the key switch to the "ON" position. The power meter
on the control panel will light up.
3. The machine is equipped with an electronic drive control system.
a. To move the machine forward, push the directional
switch forward and step on the accelerator pedal.
b. To move the machine backward, push the
directional switch backward and push down on the
accelerator pedal.
c. To park the machine, push the directional switch into the neutral
position. Always put the directional switch in the neutral position
when the machine is not used.
4. The machine will stop moving if the driver gets off the
seat.
5. Push the roller brush handle (on the right side) clockwise
to lower the roller brush. Push the side brush handle (on
the left side) counterclockwise to lower the side brush.
6. Push the brush switch to activate both the roller
brush and side brush at the same time.
7. Push the dust collection switch to activate the
dust collection motor.
8. Push the water spray switch to activate
electromagnetic valve and water pump.
9. Push the dust collection switch to activate the
dust shaker motor.
CAUTION
• To stop the machine, release your foot from the accelerator
pedal. The machine will stop on its own. The left foot pedal is
NOT the brakes. The left foot pedal is the Dust Pan Foot Lever.
Step on the Dust Pan Foot Lever for picking up large-sized
garbage.
Accelerator pedal