User Manual
Table Of Contents
- WARNINGS
- TECHNICAL SPECIFICATIONS
- MACHINE COMPONENTS
- MACHINE SET UP
- Operation Instructions
- MACHINE STORAGE
- MAINTENANCE
- Motors should be checked every 250 hours. Turn the brush on and off to ensure the motor is working properly.
- BATTERY MAINTENANCE
- Replacing Roller Brushes
- Replacing Side Brushes
- Replacing Filters
- TROUBLESHOOTING
- GLOBAL EQUIPMENT COMPANY INC.
- FLOOR CARE EQUIPMENT WARRANTY
C49R Model 641748
10
Replacing Roller Brushes
Remove the two bolts located on the left side panel
Remove screw (A), remove nut (B), and remove the cover.
Remove the nut, spring, and the dust rubber. Then pull out the roller brush.
Replace the roller brush and repeat the above steps in reverse order.
Spring
Dust rubber
A
B