User Manual
Table Of Contents
- WARNINGS
- TECHNICAL SPECIFICATIONS
- MACHINE COMPONENTS
- MACHINE SET UP
- Operation Instructions
- MACHINE STORAGE
- MAINTENANCE
- Motors should be checked every 250 hours. Turn the brush on and off to ensure the motor is working properly.
- BATTERY MAINTENANCE
- Replacing Roller Brushes
- Replacing Side Brushes
- Replacing Filters
- TROUBLESHOOTING
- GLOBAL EQUIPMENT COMPANY INC.
- FLOOR CARE EQUIPMENT WARRANTY
C49R Model 641748
9
2. If you feel a significant decline in suction after a period of time and the machine improves by
using the dust shaking function, remove all six filter cartridges and clean them by using
compressed air until dust is no longer escaping from the cartridge. Once complete, mount all six
cartridges back to their original location.
Cleaning Dust Box
1. After each operation, move the machine to a designated garbage area.
2. Remove the dust box and empty the garbage. Check for blockages prior to mounting back.
Motors
Motors should be checked every 250 hours. Turn the brush on and off to ensure the motor is
working properly.
BATTERY MAINTENANCE
• Keep the top of the battery and the terminals free from corrosion. A mix of baking soda and
water solution helps keep the batteries corrosion free. DO NOT ALLOW THE BAKING
SODA/WATER SOLUTION TO ENTER THE BATTERY CELLS.
• Use a wire brush with the baking soda solution to properly clean the battery posts and
connections.
• Check battery connections for wear and loose terminals. Replace if necessary.
Disposal
:
• Old batteries must be disposed of in compliance with the local specific regulations.
• Never dispose of old batteries with municipal waste.