User Manual
Table Of Contents
- WARNINGS
- TECHNICAL SPECIFICATIONS
- MACHINE COMPONENTS
- MACHINE SET UP
- SQUEEGEE INSTALLATION
- POWERING ON AND OFF
- LED CONTROL PANEL
- PAD DRIVER/BRUSH INSTALLATION
- SOLUTION TANK
- OPERATION
- MACHINE STORAGE
- BATTERY MAINTENANCE
- DAILY MAINTENANCE
- MONTHLY MAINTENANCE
- SQUEEGEE RUBBER BLADE REPLACEMENT
- TROUBLESHOOTING
- TROUBLESHOOTING ERROR CODES
C20T Model 641746
7
OPERATION
Traction Drive - This machine is equipped with electronic traction control
• Press the Driving Speed button or slide your finger along the Driving Speed Display
Section to adjust the driving speed of the machine.
• Press the Forward button to drive forward. Press the left and right drive switches to
drive the machine.
• Put the machine in Neutral to switch between Forward or Reverse. Press the Neutral button
to park the machine. Always leave the machine on Neutral when not using the machine to
prevent accidents.
• Press the Reverse button to drive backwards. The safety buzzer will go off. Press the left
and right drive switches to drive the machine.
• To move the machine without the power on, locate the red brake lever by the wheel. Pull
the brake lever clockwise to release the lock. DO NOT leave the brake lever released
during normal use. Always pull the brake level back counterclockwise to lock it
before using the machine normally to prevent accidents.
• Press the emergency stop button to quickly stop the machine. To deactivate the emergency
stop and start the machine again, turn the emergency stop button clockwise.
Locking
Releasing
Emergency stop