User Manual
Table Of Contents
- WARNINGS
- TECHNICAL SPECIFICATIONS
- MACHINE COMPONENTS
- MACHINE SET UP
- SQUEEGEE INSTALLATION
- POWERING ON AND OFF
- LED CONTROL PANEL
- PAD DRIVER/BRUSH INSTALLATION
- SOLUTION TANK
- OPERATION
- MACHINE STORAGE
- BATTERY MAINTENANCE
- DAILY MAINTENANCE
- MONTHLY MAINTENANCE
- SQUEEGEE RUBBER BLADE REPLACEMENT
- TROUBLESHOOTING
- TROUBLESHOOTING ERROR CODES
C20T Model 641746
6
PAD DRIVER/BRUSH INSTALLATION
1. Disconnect Power.
2. Place the Pad driver/Brush under the head assembly.
3. Lower the head assembly to the floor by stepping on the foot
pedal and letting it rise to the middle position.
4. Line up three studs on the Pad driver/Brush to the holes on the
head assembly and lock it by turning clockwise.
5. Lower the driving speed to the lowest by using
the touch screen.
6. Press the drive button to make the Pad
driver/Brush lock in completely.
SOLUTION TANK
1. Remove the solution tank cap and
fill with clean water for regular
cleaning surface. For deep and dirty
surface, Contact Global Industrial
(1-800-645-1232) for
recommendations on proper
Cleaning Solutions.
2. Check water level indicator for
water level
Water Level Indicator
Pedal
Lowest position
Middle position