User Manual

C20T Model 641746
12
3. Drain and rinse out recovery tank with clean water.
4. Clean the vacuum filter by removing the vacuum intake
cap. Remove the Pad Driver/Brush and Squeegee
assembly and clean with clean water.
MONTHLY MAINTENANCE
1. Flush out solution tank with clean water.
2. Remove the clear cap and the solution tank
filter. Clean the filter with clean water.
3. Clean rubber skirt on the brush head assembly
by removing the spring lock.
4. Motors should be checked every 250 hours.
Turn on/off both Pad/Brush and Vacuum motor
to ensure the motors are working properly.
SQUEEGEE RUBBER BLADE REPLACEMENT
1. Remove the squeegee assembly from the unit (refer to squeegee assembly installations).
2. Unlock the spring lock and slide out the blades. Replace with new blades and re-assemble.