User Manual
Table Of Contents
- WARNINGS
- TECHNICAL SPECIFICATIONS
- MACHINE COMPONENTS
- MACHINE SET UP
- SQUEEGEE INSTALLATION
- POWERING ON AND OFF
- LED CONTROL PANEL
- PAD DRIVER/BRUSH INSTALLATION
- SOLUTION TANK
- OPERATION
- MACHINE STORAGE
- BATTERY MAINTENANCE
- DAILY MAINTENANCE
- MONTHLY MAINTENANCE
- SQUEEGEE RUBBER BLADE REPLACEMENT
- TROUBLESHOOTING
- TROUBLESHOOTING ERROR CODES
C20T Model 641746
9
Using the Vacuum:
• Lower the lever of the squeegee assembly.
• Press the Vacuum button on the touch screen to activate the vacuum.
Pressing the Vacuum button again will turn it off within 10 seconds.
Energy Saver Mode:
• Press the VAC ECO button to reduce the power consumption and the
noise level of vacuum motor. Press the VAC ECO button again to
deactivate the Energy Saver mode.
Water Flow:
• Press the Water Flow button or slide your finger along the Water
Display Section to set the water flow to 1 of the 6 levels.
• The solenoid valves and pumps start when the brush motor
starts.
• You can also adjust the water flow with the ball valve.
Settings
Press the Settings button to adjust or view any of the below features.
1. Press Brightness adjustment to change the brightness of the screen.
2. Press Running time to check the total running time of the machine and its motors.
1
2
3
4
5
6
7