Specifications

128 SEBU7858-03
Maintenance Section
Differential and Final Drive Oil Level - Check
i01797397
Differential and F ina l Drive Oil
Level - Ch eck
SMCS Code: 3258-535-FLV; 4050-535-FLV
Procedure for the Tractor
g00923735
Illustration 153
The sight gauge for the differential and final drive oil
is located on the back right side of the transmission
on the tractor.
1. Park the machine on level ground.
2. Lower the bowl. Shut off the engine.
3. Clean sight gauge (2) and oil filler cap (1).
4. Maintain the oil level between the “FULL” and the
“ADD” marks on the sight gauge.
5. Remove oil filler cap (1). Add oil, if necessary.
6. Clean oil filler cap (1) and install oil filler cap (1).
Procedure for the Scraper
g00928048
Illustration 154
Oil filler tube (
3) for the differential of the scraper is
located on the right side of the scraper engine.
1. Park the machi
ne on level ground.
2. Lower the bowl. Shut off the engine.
3. Clean the cap. Remove the cap. Remove the
dipstick which is under the cap.
4. Maintain the oil level between the “FULL ” and the
“ADD” marks on the dipstick.
5. Add oil if it is necessary.
6. Clean the c
ap. Install the dipstick. Install the cap.
i0180990
1
Differential and Final Drive Oil
Sample -
Obtain
SMCS Code: 3258-008; 4050-008; 7542-008
g00928040
Illu
stration 155
(1) Filler tube fo r the differential and final d rive (scraper)
g
00924946
Illustration 156
(2) Filler tube f or the differential and final drive (tractor)