Specifications

SEBU7858-03 99
Maintenance Section
Maintenance Interval Schedule
i03641566
Maintenance Interval Schedule
SMCS Code: 1000; 7000; 7500; 7519
Ensure that al
l safety information, warnings, and
instructions are read and understood before any
operation or any maintenance procedures are
performed.
The user is responsible for the performance of
maintenanc
e, including all adjustments, the use of
proper lubricants, fluids, filters, and the replacement
of components due to normal wear and aging. Failure
to adhere t
o proper maintenance intervals and
procedures may result in diminished p erformance of
the product and/or accelerated wear of components.
Use mileage, fuel consumption, service hours, or
calendar time, WHICH EVER OCCURS FIRST,
in order t
o determine the maintenance intervals.
Products that operate in severe operating conditions
may require more frequent maintenance.
Note: Before each consecutive interval is performed,
all maintenance from the previous interval must be
perform
ed.
When Required
Batter
y - Recycle ................................................ 109
Battery or Battery Cable - Inspect/Replace ........ 109
Circuit Breakers - Reset ....................................... 115
Cuttin
g Edges and End Bits - Inspect/Replace ... 124
Draft Arm Wear Plates - Check/Adjust ............... 129
Ejector Carrier Rollers - Check/Adjust ................ 129
Eject
or Guide Rollers - Check/Adjust ................. 130
Ejector Support Rollers - Check/Adjust .............. 131
Engine Air Filter Primary Element - Clean/
Repla
ce ............................................................. 132
Engine Air Filter Secondary Element - Replace .. 135
Engine Air Filter Service Indicator -
Insp
ect/Replace ................................................ 136
Ether Starting Aid Cylinder - Replace ................. 144
Fuel System - Prime ........................................... 145
Fuse
s - Replace .................................................. 151
Oil Filter - Inspect ................................................ 159
Secondary Steering - Test .................................. 161
Ste
ering Pump Outlet Screen - Clean ................ 162
Window Washer Reservoir - Fill .......................... 172
Window Wiper - Inspect/Replace ........................ 172
Win
dows - Clean ................................................. 172
Every 10 Service Hours or Daily
Ai
r Tank Moisture and Sediment - Drain ............. 102
Auger Drive Gear Oil Level - Check ................... 106
Auger Seal - Ins pect/Replace ............................. 107
Ba
ckup Alarm - Test ............................................ 108
Brakes, Indicators and Gauges - Test .................. 113
Cooling System Coolant Level - Check ............... 119
Engine Air Filt
er Service Indicator - Inspect ........ 135
Engine Air Precleaner - Clean ............................ 136
Engine Oil Level - Check .................................... 139
Fuel System Wa
ter Separator - Drain ................. 149
Fuel Tank Water and Sediment - Drain ............... 150
Hydraulic Oil Cooler - Clean ............................... 153
Hydraulic Sy
stem Oil Level - Check ................... 157
Push Plate - Lubricate ........................................ 159
Radiator Core - Clean ......................................... 159
Seat Belt - I
nspect .............................................. 161
Transmission Oil Level - Check .......................... 170
Initial 50 Service Hours
Transmission Oil Filter and Magnetic Screen -
Replace/Clean .................................................. 167
Every 50 Se
rvice Hours or Weekly
Bail Bearings and Push Plate Spring - Lubricate .. 109
Bowl Lift C
ylinder Bearings - Lubricate ................ 111
Cab Air Filter - Clean/Replace ............................. 114
Hitch - Lubricate .................................................. 153
Tire Infla
tion - Check ........................................... 164
Initial 250 Service Hours (or at first oil
change)
Electro
nic Unit Injector - Inspect/Adjust .............. 132
Engine Valve Lash - Check ................................. 143
Evaporator Coil and Heater Coil - Clean ............ 144
Every 2
50 Service Hours
Cooling System Coolant Sample (Level 1) -
Obtain
............................................................... 120
Every 250 Service Hours or Monthly
Air Dr
yer - Check .................. .............................. 101
Auger Drive Gear Breather - Clean .................... 104
Battery - Clean/Check ......................................... 109
Belt
s - Inspect/Replace ........................................ 110
Brake Air Sy stem Pressure - Test ........................ 111
Braking System - Test .......................................... 113
Diff
erential and Final Drive Oil Level - Check ..... 128
Engine Oil (High Speed) and Oil Filter - Change .. 137
Engine Oil Sample - Obtain ................................ 140
Hydr
aulic System Oil Sample - Obtain ............... 157
Transmission Oil Sample - Obtain ...................... 171
Every 250 Service Hours or 3 Months
Engine Oil and Filter - Change ........................... 142
Initial 500 Hours (for New Systems, Refilled
Systems, and Converted Systems)
Cooling System Coolant Sample (Level 2) -
Obtain ............................................................... 121