Specifications

110 SEBU7858-03
Maintenance Section
Belts - Inspect/Replace
5. Perform the nec
essary repairs. Replace the cable
or the battery, as needed.
6. Connect the ne
gative battery cable to the
terminals of the battery.
7. Connect the n
egative battery cable at the battery
disconnect switch.
8. Install the
key for the battery disconnect switch.
Turn the k ey to the ON position.
i03639935
Belts - Inspect/Replace
SMCS Code: 1397-040; 1397-510
Procedure for the Tractor
Inspect
g01121484
Illustration 119
(1) Fan drive belt
(2) A ir conditioning compressor and alternator drive belt
1. Park the machine on level ground. Move the
transmission control to the NEUTRAL position and
engage the parking brake. Shut off the engine.
2. Open the engine access cover that is on the right
side of the tractor.
3. Inspect the condition of the fan drive belt (1).
Inspect the condition of the air conditioning
compressor and alternator drive belt (2). Inspect
the belts for the following conditions:
•
excessive cracking
•
excessive wear
•
excessive stretching
•
excessive damage
•
missing pieces
•
frayed areas
4. Close the engine access cover.
Replace
If the belts need replacement, refer to the Service
Manual or co
ntact your local Caterpillar dealer.
Procedure f
or the Scraper
Inspect
g01953
446
Illustration 120
(3) Fan drive belt
(4) Alternator and water pump d rive belt
1. Park t
he machine on level ground. Move the
transmission control to the NEUTRAL position and
engage the parking brake. Shut off the engine.
2. Open the rear engine access cover that is on the
left side of the scraper.
3. Inspect the condition of the fan drive belt (3).
Inspect the condition of the alternator and water
pump
drive belt (4). Inspect the belts for the
following conditions:
•
exc
essive cracking
•
excessive wear
•
excessive stretching
•
ex
cessive damage
•
missing pieces
•
frayed areas
4
.
C
lose the engine access cover.