Installation Guide

STEP 1

Install the two wings onto the shield. Using the 12 short

tamper-proof screws, install the left and right side wings to

the main shield. Refer to image A.

STEP 2

Install the rear end of the shield. Use a stand or partner to

hold the shield in place and install the rear end of the shield

rst. There are two nut plates that sit on top of the rear

cross member which will lock the rear shield to the frame

(refer to image C). Use the two long tamper-proof screws to

lock the shield to cross member and nut plate. The screw

will fasten to the two innermost holes on the shield (refer to

image D). The outer holes are used in the Hybrid versions

only.

STEP 3

Install the front end of the shield. Locate the two threaded

holes in the front cross member and use the two medium

length tamper-proof screws to secure the shield to the

vehicle.

STEP 4

Apply Cat Shield sticker (optional). Place the sticker on

the vehicle to warn thieves this vehicle is protected by

Cat Shield!

Congratulations! You are now #catshieldprotected. If

you have any questions or feedback about our product,

us with your latest install using @millercatcorp and

#catshieldprotected. Leave us a review and help others

get #catshieldprotected!

Side Wing

Rear Shield

Holes Used on

Rear Cross Member

Used in Hybrid Model

Side Wing