User's Guide

9
AfiFarm | AfiCollar User Guide
3.2 Assigning AfiCollars by Manual Entry
Use the Cow ID card in AfiFarm to manually assign the AfiCollar to the animal. This
procedure is best used when entering a small number of tags or re-assigning the
AfiCollar to a different cow (in such situations you first need to remove the tag
number from the original cow, before assigning to the new animal).
To manually assign AfiCollars:
1. Attach the new AfiCollar to the animal.
2. Locate the relevant cow: Enter the Cow ID in the Find field, and then press Enter.
The Cow ID card opens.
3. In the Tag field, enter the AfiCollar number, and then click Save.
Note: The AfiCollar number is located at back of the sensor.
In the example at right, AfiCollar 151000562 is attached to Cow 75.