Assembly Instruction Item# 602-2X Modern Lattice Wood Pet Crate End Table
Page 2/6 A E F D C Parts List A B C D E F B Top Bottom Left Panel Right Panel Back Panel Door 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. Hardware Small Screw RF10004 24 pcs. L-Bracket RF50003 8 pcs. Metal Pin RF40009 2 pcs. Adjustment Screw RF10049 4 pcs. Spring RF40002 2 pcs. Washer RF44013 2 pcs. Allen Key RF40103 1 pc.
Page 3/6 RF10004 x4 RF50003 x2 C Left Panel RF10004 x4 RF50003 x2 D Right Panel Diagram 1. RF10004 x8 RF50003 B x4 Bottom Panel Step 1. Attach L-Bracket (RF50003) into the pre-drilled holes on the Left Panel (C), Right Panel (D) and Bottom (B) by using screws (RF10004) as per Diag. 1.
Page 4/6 RF10004 x2 B D Diagram 2.1 E Diagram 2.2 B C RF10004 x2 E B Diagram 2.3 Step 2. - Attach Bottom (B) together with the Right Panel (D) by using screws (RF10004) as per Diag. 2.1. - Attach Back Panel (E) together with the Right Panel (D) as per Diag. 2.2. Then, attach the Left Panel (C) into the unit by using screws (RF10004) as per Diag. 2.3.
Page 5/6 B RF10004 C D x2 A Diagram 3. Step 3. Invert the Top (A) on a soft surface . Then attach the unit together with the Top (A) by using screws (RF10004) as per Diag.3. Detail RF40002 x2 RF40009 x2 Diagram 4. RF44054 Detail x2 Step 4. Assemble spring(RF40002) + door pin(RF40009) + washer(RF44054) as per diagram 4. Warning, hold the pin with finger so it doesn't flew away from the force of the spring. Gently insert all three part into predrilled holes at the door as per diagram 4.
Page 6/6 RF10049 x4 Diagram 5. Step 5. Tightening the Adjustment Screws (RF10049) under the unit as per Diag.5.
