Installation Guide

RF10004
RF10004
A
(Left)
B
Step 5 : Attach leg frames to the underside of the
platform using 8 pcs Screws F6 x 5/8"
(RF10004).See Diag 5.
Step 6 : Attach back frame to the platfrom using 4 pcs
Screws JCA 1/4” x 38 mm. (RF10020).Use the Hexagonal
Wrench (RF40015) provided to secure the connections.See
Diag 6.
Step 8 : Your unit is now fully assembled.
You may raise and lower the arms
as shown in Diag 8.
Diagram 5.
Diagram 8.
D
A
(Left)
(Right)
B
B
Diagram 6.
RF10020
RF10020
D
A
(Left)
B
C
C
(Right)
B
Step 7 : Attach the arms to the platfrom with 4 pin wood (WD40154)
and using 4 pcs Screws F6 x 1" (RF10019) to joint
pin wood (WD40154) as arms.Making sure that the arms are
correctly positioned. See Diag.7.
Diagram 7.
RF10019
RF10019
WD40154
WD40154