Installation Guide

RF10004
RF10004
RF10004
RF10004
Diagram 3.
Diagram 2.
Diagram 1.
Diagram 4.
(Right)
B5
B2
B3
B2
Leg Frame (Left) 1 PC.
(Left)
Leg Frame (Right) 1 PC.
(Right)
B5
B4
B1
B2
B3
Platform Frame 1 PC.
A2
A1
A1
A3
A3
A3
A5
A4
A4
A5
A5
A5
A4
A3
A5
A4
A4
A5
A5
A5
A4
A2
C1
C1
C1
C3
C4
C5
C2
C2
C2
C5
Arms 2 PCS.
C2
C1
C3
C4
C5
D2
D1
D1
D2
D3
D4
D3
Back Frame 1 PC.
D1
D2
D4
D4
Platform Frame (Part A)
Leg Frame (Part B)
Arm (Part C)
Back Frame (Part D )
Step 2 : Attach right front (B2), right back (B3) to cross bar (B5)
and attach left front (B1),left back (B4) to second cross bar (B5)
using 8 pcs Screws F6 x 1 1/4" (RF10002) as per Diag.2.
Step 3 : Attach front (C2) to the top cross bar (C1) using a
screws F6 x 1 1/4" (RF10002), attach 3
slats (C3) to the hole inside cross bar (C1), attach bottom cross bar (C5) to front (C2) and 3
slats (C3) using a Screws F6 x 1 1/4" (RF10002), attach back (C4) to the top cross bar (C1)
and bottom cross bar (C5) using 2 pcs Screws F6 x 1 1/4" (SC10002), making sure that the
arm are correctly positioned.
Step 4 : Attach the top cross bar (D1) and middle cross bar (D2)
to left leg (D3) and right leg (D4) using 6 pcs Screws F6 x 5/8"
(RF10004), making sure that the hole are correctly positioned.
Step 1 : Attach each slat (A4),(A5) and cross bar (A3) to the front piece (A1)
and the back piece (A2) by using 8 pcs Screws F6 x 1 1/4"( RF10002)
as per Diag.1.
RF10002
RF10002
RF10002
RF10002
RF10002
RF10002