SDS

Section 8. Exposure controls/personal protection
In case of insufficient ventilation, wear suitable respiratory equipment.
The correct choice of respiratory protection depends upon the chemicals being handled,
the conditions of work and use, and the condition of the respiratory equipment. Safety
procedures should be developed for each intended application. Respiratory protection
equipment should therefore be chosen in consultation with the supplier/manufacturer
and with a full assessment of the working conditions.
Respiratory protection
Section 9. Physical and chemical properties
Physical state
Melting point
Vapor pressure
Vapor density
Liquid.
Not available.
Not available.
Not available.
Not available.
Odor
pH
Brown.
Color
Evaporation rate
Not available.
Auto-ignition temperature
Flash point
Not available.
Closed cup: >200°C (>392°F) [Pensky-Martens.]
Not available.
Not available.
Viscosity
Kinematic: 43 mm
2
/s (43 cSt) at 40°C
Kinematic: 8.3 to 9 mm
2
/s (8.3 to 9 cSt) at 100°C
Not available.
Odor threshold
Partition coefficient: n-
octanol/water
Appearance
Boiling point
Not available.
Lower and upper explosive
(flammable) limits
Not available.
Decomposition temperature
Not available.
Density
Solubility
<1000 kg/m³ (<1 g/cm³) at 15°C
insoluble in water.
Not applicable. Based on - Physical state
Flammability (solid, gas)
Pour point
-39 °C
Section 10. Stability and reactivity
Hazardous decomposition
products
Conditions to avoid
Under normal conditions of storage and use, hazardous decomposition products should
not be produced.
The product is stable.
Chemical stability
Incompatible materials
Possibility of hazardous
reactions
Under normal conditions of storage and use, hazardous reactions will not occur.
Under normal conditions of storage and use, hazardous polymerization will not occur.
Reactivity
No specific test data available for this product. Refer to Conditions to avoid and
Incompatible materials for additional information.
Avoid all possible sources of ignition (spark or flame).
Reactive or incompatible with the following materials: oxidizing materials.
Date of issue
07/23/2019.
Page: 5/9
Castrol EDGE 0W-20 U.S.
ENGLISH
Product name
Product code
Version
5.01
Format
Language
468161-UX05
US