User's Manual


CastleNetBTC08R800UserGuide


CastleNetTechnologyInc.
Copyright© 2011 AllRightsReserved. 5 of 6

3. Block Diagram
4. INSTALLATION
4.1 Installed in Laptop PC
The Mainboard of the system should provide a Host connector and Cable connection for BT
module. Please follow the SOP to install & assemble it step by step.
4.2 Testing in Lab
The module is embedded inside Notebook. If for testing purpose, we provide the “USB Testing
Board” in order to let tester connect BTC08R800 via the special cable connection to PC externally.
The USB Testing Board provides +5V/3.3V conversion from PC Host. Please plug into any USB
port on your PC.