Manual

Castle Inc TSM-21 Diagnostic Manual v2 Page 11 of 63
Page Procedure
Clamp releases slowly, Machine Routs and Drills:
□ Check Clamp cylinder and air line…………………………………. 19-20 21.12
□ Check Pilot Valve exhaust port……………………………………..
(up to machine sn: 61076 Only)
21-22 21.13
□ Check Pilot Valve for function or blockage………………………..
(up to machine sn: 61076 Only)
22-24 21.14
□ Check Clamp Solenoid for blockage………………………………. 11 21.10
Clamp doesn’t release…Machine Routs, and Drills:
□ Adjust internal Air Pressure………………………………………… 51-52 21.90
□ Check Pilot Valve for function or blockage………………………..
(up to machine sn: 61076 Only)
22-24 21.14
□ Check Drill Stop Switch……………………………………………... 37-38 21.43
□ Check Foot Switch…………………………………………………... 45-46 21.80
Clamp doesn’t release…Machine Routs, DOES NOT Drill:
□ Check Pilot Valve for function or blockage………………………..
(up to machine sn: 61076 Only)
22-24 21.14
□ Check Drill Solenoid for function or blockage…………………….. 40-41 21.51
Clamp doesn’t release…Machine Routs but Router DOES NOT retract, DOES NOT Drill:
□ Router Stop switch…………………………………………………... 27-29 21.22