Specifications

Manual Euro-MERiDIAN
Chapter 25 Page 25-1
C
C
h
h
a
a
p
p
t
t
e
e
r
r
2
2
5
5
CCTV or LIGHTING CONTROL WITH
EURO-MERiDIAN
This chapter suggests further applications for the facilities of the
Euro-MERiDIAN system.
Euro-MERiDIAN can be used to
switch CCTV cameras, lighting,
etc. using the wide range of
output configurations, and
output types available.
Outputs may be located at any
convenient point by use of
Output modules (or by use of
outputs on Zone Expander
units, Keypads and Set/Unset
Tag Readers) as well as at End
Station.
As well as outputs triggered by
specific system functions, Euro-
MERiDIAN may be programmed
to switch outputs automatically
by triggering detectors. This
will NOT interfere with the
normal system response to the
zones, however programmed.
The ‘SWITCHER’ zone type is
provided to switch outputs
without initiating any other
system function.
All Systems
A set of output types is
available designated to ‘Follow
zone xx’ (types 1001 on) – which
will be live whenever the
designated zone is in its active
state, automatically restoring
when the appropriate zone
clears.
These output types may be
programmed to any suitable
output on the system.
Systems fitted MSX134 or
MSX256 Cards
Alternatively, if the system is
fitted with an MSX card, an
additional output type (0035) is
available providing the
following functionality:
FOLLOW (whilst zone active),
TIMED or LATCHED output
Follow individual ZONE, AREA,
WARD or SHUNT LIST
Follow WHEN SET, WHEN
UNSET or ALWAYS