Specifications

Manual Euro-MERiDIAN
Chapter 19 Page 19 - 1
C
C
h
h
a
a
p
p
t
t
e
e
r
r
1
1
9
9
GUARD TOUR SYSTEMS WITH
Euro-MERiDIAN
This chapter outlines a further application for the Euro-MERiDIAN
system.
It is possible to use the Access
Control features of Euro-
MERiDIAN to install a ‘Guard
Tour’ system. Guards touring
the site can use a programmed
tag at suitable readers to log
their progress, by guard name,
location, date and time.
This facility is available only on
Euro-44+ and above.
A: Features
The number of points available
is dependent upon the number
of control points otherwise in
use on the system:
Keypads + Set/Unset Readers +
Ward Controllers + Access
Controllers + Guard Tour
points.
The maximum number
available is:
Euro-44+: 7
Euro-134: 15
Euro-256: 16
Tour points may be located
internally or externally by
selection of appropriate
components:
EUR-028 Internal Guard Tour
Tag Reader
EUR-027 External IP66 Tag
Reader and Guard Tour
Station
The Guard Tour Station may be
plugged onto a Euro-MERiDIAN
Intelligent Power Supply, if
required.
NOTE: It is NOT possible at
this time to provide “time
overdue” or “out of time”
warnings.
B: Addressing the units
The units should be addressed
between 1 and 16, as described
on page 12-1. No other control
devices (Keypads, Set/Unset
Readers, Access Controllers,
etc.) may duplicate these
addresses.